Buy 9908-550-2XA Filter Radio Freque part by Greatbatch Sierra Inc

Part Number:  9908-550-2XA
Alternate P/N:  99085502XA
Manufacturer:  greatbatch sierra inc
NIIN:  013367668
Item Name :  filter radio freque
CAGE Code:  79474
INC Code:  00765
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 9908-550-2XA (described as Filter Radio Freque), manufactured by Greatbatch Sierra Inc with CAGE code 79474. This part is registered under NSN 5915-01-336-7668, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5915 Filters and Networks. Our verification process will confirm traceability through supporting identifiers including NIIN 01-336-7668, NCB code 01 (origin: USA), and INC 00765. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 9908-550-2XA requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 9908-550-2XA

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 9908-550-2XA, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 9908-550-2XA with NSN 5915-01-336-7668, 5915013367668

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5915-01-336-7668

Item PartTypeName:

FILTER,RADIO FREQUENCY INTERFERE

59150133676680P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
5004-1009695

Characteristics Data of NSN 5915-01-336-7668, 5915013367668

MRCCriteriaCharacteristic
AFGAOPERATING TEMP RANGE-28.0 TO 65.0 DEG CELSIUS
AGAVEND ITEM IDENTIFICATIONTACTICAL AIR OPERATIONS MODULE AN/TYQ-23(V)1
AHBBPOWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ460.0 2ND RADIO INTERFERENCE 2ND FUNCTION
AHBEMAXIMUM VOLTAGE DROP PER FUNCTION3.0 VOLTS AC 1ST RADIO INTERFERENCE 1ST FUNCTION
ADAQBODY LENGTH6.000 INCHES NOMINAL
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH4.500 INCHES NOMINAL
AFSVAVERAGE LIFE RATING IN HOURS1000.0
AHBBPOWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ460.0 1ST RADIO INTERFERENCE 1ST FUNCTION
AHBCOPERATING CURRENT RATING PER FUNCTION IN AMPS6.0 1ST RADIO INTERFERENCE 1ST FUNCTION
AHBCOPERATING CURRENT RATING PER FUNCTION IN AMPS6.0 2ND RADIO INTERFERENCE 2ND FUNCTION
AHBLPRINCIPAL CIRCUITRY TYPE PER FUNCTIONINDUCTANCE-CAPACITANCE 1ST RADIO INTERFERENCE 1ST FUNCTION
AHBLPRINCIPAL CIRCUITRY TYPE PER FUNCTIONINDUCTANCE-CAPACITANCE 2ND RADIO INTERFERENCE 2ND FUNCTION
AHBNINPUT TERMINAL MANUFACTURER CODE13973
AHBPINPUT TERMINAL IDENTIFICATIONSMA-RECEPTACLE
AHCHAVERAGE POWER RATING PER FUNCTION1.5 WATTS 1ST RADIO INTERFERENCE 1ST FUNCTION
AKEJMOUNTING FACILITY SCREW THREAD SERIES DESIGNATORUNC
CBBLFEATURES PROVIDEDFUNGUS RESISTANT AND SHOCK RESISTANT
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 TAB,SOLDER LUG GROUND 3RD FUNCTION
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY2 TAB,SOLDER LUG OUTPUT 2ND FUNCTION
CQGCOPERATING VOLTAGE RATING AND TYPE PER FUNCTION150.0 VOLTS AC 1ST RADIO INTERFERENCE 1ST FUNCTION
CQGCOPERATING VOLTAGE RATING AND TYPE PER FUNCTION150.0 VOLTS AC 2ND RADIO INTERFERENCE 2ND FUNCTION
CQJXNOMINAL THREAD SIZE0.164 INCHES
CRDCMAXIMUM DIELECTRIC WITHSTANDING DC VOLTAGE300.0 VOLTS AT SEA LEVEL
CRSTBODY SURFACE TREATMENTTIN
CTJSUNPACKAGED UNIT WEIGHT3.500 POUNDS NOMINAL
STYLSTYLE DESIGNATORRECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
ABHPOVERALL LENGTH6.312 INCHES NOMINAL
ADATBODY WIDTH1.250 INCHES NOMINAL
ADAUBODY HEIGHT3.000 INCHES NOMINAL
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH2.625 INCHES NOMINAL
AHAQSOURCE IMPEDANCE RATING PER FUNCTION50.0 OHMS 1ST RADIO INTERFERENCE 1ST FUNCTION
AHAQSOURCE IMPEDANCE RATING PER FUNCTION50.0 OHMS 2ND RADIO INTERFERENCE 2ND FUNCTION
AHASLOAD IMPEDANCE PER FUNCTION50.0 OHMS 1ST RADIO INTERFERENCE 1ST FUNCTION
AHASLOAD IMPEDANCE PER FUNCTION50.0 OHMS 2ND RADIO INTERFERENCE 2ND FUNCTION
AHBEMAXIMUM VOLTAGE DROP PER FUNCTION3.0 VOLTS AC 2ND RADIO INTERFERENCE 2ND FUNCTION
AHCJFULL LOAD INSERTION LOSS FREQUENCIES IN MEGAHERTZ0.0 AND 0.1 AND 1.0 AND 10.0 AND 100.0 AND 1000.0
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 THREADED HOLE
CQRGBODY MATERIALMETAL
AHCGMAXIMUM TEMP RISE25.0 DEG CELSIUS
AHCHAVERAGE POWER RATING PER FUNCTION1.5 WATTS 2ND RADIO INTERFERENCE 2ND FUNCTION
AHCKFULL LOAD MINIMUM INSERTION LOSS AT SPECIFIED FREQUENCY IN DECIBELS20.0 AND 75.0 AND 90.0
AKNAINCLOSURE TYPEHERMETICALLY SEALED
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 CONNECTOR,PLUG INPUT 1ST FUNCTION
FEATSPECIAL FEATURESTWO FILTERED FUNCTIONS

Schedule B & Trade

End Use : 41210 Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310) Reception apparatus, nesoi
SITC : 76289 Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL 12b2--1
Quantity per pack No qup
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061990 - Electrical equip: filters
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top