We've received your request for C07 0002 304 (described as Capacitor Fixed Cer), manufactured by Harris Corporation with CAGE code 14304. This part is registered under NSN 5910-01-180-8986, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-180-8986, NCB code 01 (origin: USA), and INC 00007. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your C07 0002 304 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-01-180-8986 Item PartTypeName: CAPACITOR,FIXED,CERAMIC DIELECTR | 5910 | 011808986 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10282-0001 | 3 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | SINGLE INLINE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.115 INCHES MINIMUM |
| ADAQ | BODY LENGTH | 0.850 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.135 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.300 INCHES MAXIMUM |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.100 INCHES NOMINAL |
| AEBT | TERMINAL DIAMETER | 0.010 INCHES NOMINAL |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | ONE TERMINAL COMMON TO EACH SECTION |
| BWGP | SECTION QUANTITY | 7 |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.010 MICROFARADS ALL SECTIONS |
| CQFB | VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE | -15.0 TO 15.0 WITHOUT VOLTAGE APPLIED ALL SECTIONS |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC ALL SECTIONS |
| CRTP | TOLERANCE RANGE PER SECTION | -20.00 TO 20.00 PERCENT ALL SECTIONS |
| CWJK | CASE MATERIAL | PLASTIC |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 2.5000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 PIN |
| End Use : 20005 | Electric apparatus |
|---|---|
| Schedule B : 8532290040 (NAICS 334416) | Fixed capacitors, nesoi |
| SITC : 77867 | Fixed capacitors, n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | Q2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | P - 77.5 |
| NMFC: | 061400 - Condensers/parts noi/capacitors |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
