Buy 026986 Fan Tubeaxial part by Harris Technical Services Corp

Part Number:  026986
NIIN:  012250974
Item Name :  fan tubeaxial
CAGE Code:  0C9D4
INC Code:  04244
Country:  USA
NCB Code:  01
FSG:  41 Refrigeration Air Conditioning and Air Circulating Equipment

We've received your request for 026986 (described as Fan Tubeaxial), manufactured by Harris Technical Services Corp with CAGE code 0C9D4. This part is registered under NSN 4140-01-225-0974, classified in FSG 41 Refrigeration Air Conditioning and Air Circulating Equipment / FSC 4140 Fans Air Circulators and Blower Equipment. Our verification process will confirm traceability through supporting identifiers including NIIN 01-225-0974, NCB code 01 (origin: USA), and INC 04244. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 026986 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 026986

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 026986, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 4140-01-225-0974, 4140012250974

MRCCriteriaCharacteristic
CQKXAir Flow Rate175.000 CUBIC FEET PER MINUTE NOMINAL
ADZCEnvironmental ProtectionHUMIDITY PROOF AND SALT SPRAY RESISTANT AND SHOCK PROOF AND VIBRATION PROOF
STYLStyle DesignatorFIXED
MATTMaterialALUMINUM ALLOY 356.0 HOUSING
AEHYAmbient Temp At Full Rated Power-54.0 DEG CELSIUS AND 100.0 DEG CELSIUS
CSBHVoltage In Volts And Current Type200.0 AC
AEQCOperating Speed At Rated Capacity In Rpm5300.0
CSYLPrime Mover Power Rating0.057 HORSEPOWER
ADNKFlow DirectionOUTWARD
AXHRMounting Facility Type And Quantity2 FLANGE AND 8 UNTHREADED HOLE
MATTMaterialPLASTIC POLYCARBONATE BLADE
ABBBSpeed AdjustmentsSINGLE SPEED
AGBDElectrical Connection TypeTERMINAL BLOCK
CWLXHousing Inside Diameter4.125 INCHES NOMINAL
AYSYRotation Direction For Which DesignedCOUNTERCLOCKWISE
CWLYPrime Mover Drive Shaft Bearing TypeBALL
ABGLWidth4.690 INCHES NOMINAL
MDCLMaterial Document And ClassificationQQ-A-601 FED SPEC SINGLE MATERIAL RESPONSE HOUSING
FAAZPhaseTHREE
AKCVDrive TypeDIRECT
AKDJPrime Mover TypeELECTRIC MOTOR
SFTTSurface TreatmentPAINT HOUSING
AKNAInclosure TypeFULLY INCLOSED
FREQFrequency In Hertz400.0
ABRYLength1.500 INCHES NOMINAL
HGTHHeight4.690 INCHES NOMINAL
AJLYStatic Pressure At Specified Air Flow Rate0.0 INCHES OF WATER
STDCSurface Treatment Document And ClassificationTT-E-489,TYPE B FED SPEC SINGLE TREATMENT RESPONSE HOUSING"

Schedule B & Trade

End Use : 41030 Household appliances
Schedule B : 8414599080 (NAICS 333413) Fans, nesoi
SITC : 74343 Fans, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9---n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 156600 - Plastic/rubber article viz:
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 753 - Housewares and related products

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top