AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
+1-714-705-4780 sales@aerospaceexchange.com
QUICK QUOTE HERE
Home   /   Hartwell Corporation    /   Part WSI 4 7W

Buy WSI-4-7W Standoff Threaded S part by Hartwell Corporation

Part Number:  WSI-4-7W
Alternate P/N:  WSI47W
Manufacturer:  hartwell corporation
NSN:  5340-01-374-5508
NIIN:  013745508
Item Name :  standoff threaded s
CAGE Code:  83014
INC Code:  40280
Country:  USA
NCB Code:  01

We've received your request for WSI-4-7W (described as Standoff Threaded S), manufactured by Hartwell Corporation with CAGE code 83014. This part is registered under NSN 5340-01-374-5508, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-374-5508, NCB code 01 (origin: USA), and INC 40280. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your WSI-4-7W requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for WSI-4-7W

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload  

How to Begin the Quotation Process

  1. Fill out and submit the form for part WSI-4-7W, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number WSI-4-7W with NSN 5340-01-374-5508, 5340013745508

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5340-01-374-5508

Item PartTypeName:

STANDOFF,THREADED,SPACING

53400137455080P
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
3D0052-70525

Characteristics Data of NSN 5340-01-374-5508, 5340013745508

MRCCriteriaCharacteristic
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-A-12545 MIL SPEC SINGLE MATERIAL RESPONSE STANDOFF
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE STANDOFF
MATTMATERIALALUMINUM ALLOY 6061 STANDOFF STEEL COMP 304 INSERT
AAJFTHREAD DIRECTIONRIGHT-HAND LEFT INTERNAL
SFTTSURFACE TREATMENTCHROMATE STANDOFF
ABMZDIAMETER0.320 INCHES MINIMUM AND 0.321 INCHES MAXIMUM
AAJDTHREAD CLASS3B LEFT INTERNAL
ANLRCROSS-SECTIONAL SHAPEROUND
CMLPTHREAD QUANTITY PER INCH32 LEFT INTERNAL
CQJXNOMINAL THREAD SIZE0.190 INCHES LEFT INTERNAL
AASATHREAD LENGTH0.420 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD)
THSDTHREAD SERIES DESIGNATORUNF LEFT INTERNAL (INCLUDES THRU THREAD)
ABRYLENGTH0.700 INCHES NOMINAL
STYLSTYLE DESIGNATORLEFT INTERNAL THREAD
FEATSPECIAL FEATURESOVAL HEAD WITH 2 MOUNTING HOLES ON UNTHD END 0.097 IN. MIN AND 0.102 IN. MAX DIA; INSERT PROVIDES THDS

Identification

ADPE Represents items with no adp components
CRITL The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input).
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL -------
Quantity per pack No qup
Repariability
Shelf Life N/A
SOS F77
Unit of Measure Ea

Find Most Relevant Part No of WSI-4-7W

  • WSI-000JA
  • Press Solid Tire
  • Wheel Systems International Inc
  • WSI-00201
  • Rubber Sheet Solid
  • Wheel Systems International Inc

Recently Viewed Parts

WSI-4-7W

RFQ

KIT-229

RFQ

BROWSE BY CATEGORIES

Complete Aerospace and NSN Parts Purchasing Platform

asach

AS9120B and ISO 9001:2015
asap_member

Aviation Suppliers Association Member
certified_company

FAA AC 0056B Accredited
as6081_supplier

AS 6081:2012 Certification
esd_association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top