Buy MS21919-8 Clamp Loop part by Hellermanntyton Limited

Part Number: MS21919-8

Alternate P/N: MS219198

Manufacturer: hellermanntyton limited

NSN: 5340-00-291-5347

NIIN: 002915347

Item Name : clamp loop

CAGE Code: F3341

FSC: 5340 Hardware Commercial

INC Code: 17532

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for MS21919-8 (described as Clamp Loop), manufactured by Hellermanntyton Limited with CAGE code F3341. This part is registered under NSN 5340-00-291-5347, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 00-291-5347, NCB code 00 (origin: USA), and INC 17532. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS21919-8 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS21919-8

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS21919-8, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS21919-8 with NSN 5340-00-291-5347, 5340002915347

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-00-291-5347 Item PartTypeName: CLAMP,LOOP	5340	002915347	Y	P	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
0236109T00	3	9	5

Characteristics Data of NSN 5340-00-291-5347, 5340002915347

MRC	Criteria	Characteristic
AAAL	TONGUE HOLE TYPE	ROUND,UNTHREADED
AAAP	CUSHIONING ENVIRONMENTAL PROTECTION	WEATHER RESISTANT
ABMK	OVERALL WIDTH	0.500 INCHES NOMINAL
ABMZ	DIAMETER	0.204 INCHES NOMINAL
ABPX	MATERIAL THICKNESS	0.032 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	MULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
AZCY	CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.654 INCHES NOMINAL
AZDC	DISTANCE FROM LOOP CENTER TO TONGUE END	0.872 INCHES NOMINAL
BZTN	LOOP INSIDE DIAMETER	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
FEAT	SPECIAL FEATURES	WEAPONS SYSTEM ESSENTIAL
MATT	MATERIAL	ALUMINUM ALLOY 2024 BAND
MATT	MATERIAL	RUBBER CHLOROPRENE CLASS CR CUSHION
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	00-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
SFTT	SURFACE TREATMENT	CHROMATE BAND
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	-1L-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE BAND
STYL	STYLE DESIGNATOR	OFFSET MOUNT

Schedule B & Trade

End Use : 50030	Military trucks, armored vehicles, etc.
Schedule B : 8710000090 (NAICS 336992)	Parts of armored fighting vehicles, motorized, whether or not fitted with weapons
SITC : 89111	Tanks and other armored fighting vehicles, motorized, whether or not fitted with weapons, and parts of such vehicles

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD	A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	H
Classification Control	U
MGMT_CTL	T22bxx-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	180 mo.
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	J - 100.0
NMFC:	013120 - Aluminum article noi sub 6
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware