We've received your request for 1124-4-J (described as Insulation Sleeving), manufactured by Hellermanntyton Limited with CAGE code K1793. This part is registered under NSN 5970-00-281-3913, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5970 Electrical Insulators and Insulating Materials. Our verification process will confirm traceability through supporting identifiers including NIIN 00-281-3913, NCB code 00 (origin: USA), and INC 61626. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 1124-4-J requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5970-00-281-3913 Item PartTypeName: INSULATION SLEEVING,ELECTRICAL,S | 5970 | 002813913 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1124-4-J | 3 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJH | TEMP RATING | -55.0 DEG CELSIUS AND 135.0 DEG CELSIUS |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| AFZP | LARGE END WALL THICKNESS OF MAIN BODY | 0.070 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| AFZQ | SMALL END WALL THICKNESS OF MAIN BODY | 0.045 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| AGAH | MAIN BODY OVERALL LENGTH | 6.780 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | 0.380 INCHES MINIMUM AFTER UNRESTRICTED RECOVERY |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | 1.340 INCHES MINIMUM AS SUPPLIED |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | 0.900 INCHES MINIMUM AFTER UNRESTRICTED RECOVERY |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | 1.340 INCHES MINIMUM AS SUPPLIED |
| AGAM | DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | 5.220 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| BNKG | END LARGEST DIAMETER | 0.900 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| CQBC | MINIMUM TENSILE STRENGTH | 1200 POUNDS PER SQUARE INCH |
| CQXG | LIP HEIGHT | 0.120 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| CRDG | LIP WIDTH | 0.040 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| FLEX | FLEXIBILITY | FLEXIBLE |
| HGTH | HEIGHT | 0.860 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| HUES | COLOR | BLACK |
| MATT | MATERIAL | PLASTIC CROSS-LINKED POLYOLEFIN |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-I-81765/1,TYPE II MIL SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | BOOT-90 DEGREES |
| UKBG | DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | 200.0 VOLTS PER MIL 0.001 INCH |
| End Use : 20005 | Electric apparatus |
|---|---|
| Schedule B : 8546900000 (NAICS 326199) | Electrical insulators, nesoi |
| SITC : 77324 | Electrical insulators of material other than glass or ceramics |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | Q2200x- |
| Quantity per pack | 1 |
| Repariability | Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 103300 - Insulating material noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
