Buy 1502-2-G Insulation Sleeving part by Hellermanntyton Limited

Part Number: 1502-2-G

Alternate P/N: 15022G

Manufacturer: hellermanntyton limited

NSN: 5970-01-171-9533

NIIN: 011719533

Item Name : insulation sleeving

CAGE Code: K1793

FSC: 5970 Electrical Insulators and Insulating Materials

INC Code: 61626

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 1502-2-G (described as Insulation Sleeving), manufactured by Hellermanntyton Limited with CAGE code K1793. This part is registered under NSN 5970-01-171-9533, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5970 Electrical Insulators and Insulating Materials. Our verification process will confirm traceability through supporting identifiers including NIIN 01-171-9533, NCB code 01 (origin: USA), and INC 61626. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 1502-2-G requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1502-2-G

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 1502-2-G, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 1502-2-G with NSN 5970-01-171-9533, 5970011719533

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5970-01-171-9533 Item PartTypeName: INSULATION SLEEVING,ELECTRICAL,S	5970	011719533		P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1502-2-G	5	2	5

Characteristics Data of NSN 5970-01-171-9533, 5970011719533

MRC	Criteria	Characteristic
ADZC	ENVIRONMENTAL PROTECTION	WATER RESISTANT
AGAB	MAIN BODY WALL THICKNESS	0.040 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AGAH	MAIN BODY OVERALL LENGTH	2.400 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AGAJ	MAIN BODY SMALL END INSIDE DIAMETER	0.420 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
AGAJ	MAIN BODY SMALL END INSIDE DIAMETER	0.750 INCHES MINIMUM AS SUPPLIED
AGAK	MAIN BODY LARGE END INSIDE DIAMETER	0.540 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AGAK	MAIN BODY LARGE END INSIDE DIAMETER	0.540 INCHES NOMINAL AS SUPPLIED
AGAL	DISTANCE FROM BOTTOM OF SHOULDER TO LARGE END OF MAIN BODY	1.250 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
MATT	MATERIAL	RUBBER
STYL	STYLE DESIGNATOR	BOOT-STRAIGHT

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8546900000 (NAICS 326199)	Electrical insulators, nesoi
SITC : 77324	Electrical insulators of material other than glass or ceramics

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown