Buy MB2.5A10C2 Mounting Base Tiedown Electrical part by Hellermanntyton Limited

Part Number:  MB2.5A10C2
Manufacturer:  hellermanntyton limited
NIIN:  016544046
CAGE Code:  53421
INC Code:  36196
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for MB2.5A10C2 (described as Mounting Base Tiedown Electrical), manufactured by Hellermanntyton Limited with CAGE code 53421. This part is registered under NSN 5975-01-654-4046, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5975 Electrical Hardware and Supplies. Our verification process will confirm traceability through supporting identifiers including NIIN 01-654-4046, NCB code 01 (origin: USA), and INC 36196. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MB2.5A10C2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MB2.5A10C2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part MB2.5A10C2, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MB2.5A10C2 with NSN 5975-01-654-4046, 5975016544046

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5975-01-654-4046

Item PartTypeName:

MOUNTING BASE,TIE DOWN,ELECTRICA

59750165440460PA
CIICHCCESDPMICCriticalityENAC
UAA0
Part NumberISCRNVCRNCCHCCMSDSSADC
MB2.5A10C2523

Characteristics Data of NSN 5975-01-654-4046, 5975016544046

MRCCriteriaCharacteristic
HUESCOLORIVORY
ABHPOVERALL LENGTH0.625 INCHES NOMINAL
ABKWOVERALL HEIGHT0.160 INCHES NOMINAL
AGAVEND ITEM IDENTIFICATION5411016231897
AXGYMOUNTING METHODADHESIVE AND SCREW
BPJZUSAGE LOCATIONEXTERIOR AND INTERIOR
CYLYCABLE TIE SIZE ACCOMMODATEDSTANDARD
MATTMATERIALPLASTIC NYLON
CBBLFEATURES PROVIDEDROHS DIRECTIVE COMPLIANCE
ABMKOVERALL WIDTH0.625 INCHES NOMINAL
AFGAOPERATING TEMP RANGE-40.0 TO 85.0 DEG CELSIUS
FEATSPECIAL FEATURESTHE 4 SCREW HOLES ARE 2.8MM IN DIAMETER. THE MAXIMUM CABLE TIE WIDTH IS 2.5MM.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 12b2---
Quantity per pack 0
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Pg

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: Q - 70.0
NMFC: 093600 - Brackets/bushings/joints/mounts etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 713 - Metal hardware

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top