Buy 8494B OPT001 Attenuator Variable part by Hewlett-Packard Company

Part Number:  8494B OPT001
Manufacturer:  hewlett packard company
NIIN:  010214931
Item Name :  attenuator variable
CAGE Code:  K3464
INC Code:  00838
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 8494B OPT001 (described as Attenuator Variable), manufactured by Hewlett-Packard Company with CAGE code K3464. This part is registered under NSN 5985-01-021-4931, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5985 Antennas Waveguides and Related Equipment. Our verification process will confirm traceability through supporting identifiers including NIIN 01-021-4931, NCB code 01 (origin: USA), and INC 00838. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 8494B OPT001 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 8494B OPT001

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 8494B OPT001, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 8494B OPT001 with NSN 5985-01-021-4931, 5985010214931

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5985-01-021-4931

Item PartTypeName:

ATTENUATOR,VARIABLE

59850102149310P
CIICHCCESDPMICCriticalityENAC
U G0
Part NumberISCRNVCRNCCHCCMSDSSADC
26K265561C4

Characteristics Data of NSN 5985-01-021-4931, 5985010214931

MRCCriteriaCharacteristic
AAFSAPPLICATION DESIGNTRANSMISSION LINE
AAQLBODY STYLECOAXIAL TYPE
ABHPOVERALL LENGTH6.200 INCHES NOMINAL
ABKWOVERALL HEIGHT1.700 INCHES NOMINAL
ABMKOVERALL WIDTH2.900 INCHES NOMINAL
AGAVEND ITEM IDENTIFICATIONTICONDEROGA CLASS CG (47); SUPPORT EQUIPMENT,B-52 AIRCRAFT; ARLEIGH BURKE CLASS DDG; F117A AIRCRAFT; SUPPORT EQUIPMENT,F-15 AIRCRAFT; AIRCRAFT,EAGLE F-15; COMMUNICATIONS PROGRAM,COMBATN THEATHER (TRI-TAC) 4781; NIMITZ CLASS CVN; AIRCRAF
AHTWVOLTAGE STANDING WAVE RATIO1.90
AHUCCOAXIAL CONNECTOR SERIES DESIGNATIONN
AJDBPOWER RATING1.0 WATTS AVERAGE AND 100.0 WATTS PEAK
ASYCINSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS2.22
ASYDOVERALL ATTENUATION RANGE IN DECIBELS0.0 TO 11.0
ASYFATTENUATION VARIATION METHODSTEPPED
ASYGSTEP POSITION QUANTITY11
ASYHATTENUATION PER STEP IN DECIBELS1.0
AXHRMOUNTING FACILITY TYPE AND QUANTITY1 FREE STANDING BASE
BNGRFREQUENCY RANGE0.000 HERTZ MINIMUM AND 18.000 GIGAHERTZ MAXIMUM
BQNROVERALL ATTENUATION ACCURACY IN DECIBELS-0.90 TO 0.90
CQTQADJUSTMENT DEVICE TYPE AND QUANTITY1 KNOB
CRTLCRITICALITY CODE JUSTIFICATIONFEAT
CTGGIMPEDANCE RATING IN OHMS50.0 INPUT-OUTPUT
FEATSPECIAL FEATURESWEAPON SSYTEM ESSENTIAL
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACE GOLD
PRMTPRECIOUS MATERIALGOLD
TTQYTERMINAL TYPE AND QUANTITY2 CONNECTOR,COAXIAL,FEMALE
ZZZVFSC APPLICATION DATAMICROWAVE EQUIPMENT

Schedule B & Trade

End Use : 21400 Telecommunications equipment
Schedule B : 8529109000 (NAICS 334220) Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi
SITC : 76493 Parts of television receivers, radiobroadcast receivers, transmission apparatus for radio telephony, telegraphy, broadcasting or television etc.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature but does have other critical featur (s) such as tolerance, fit restrictions or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: J - 100.0
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top