Buy 5330B Counter Electronic part by Hewlett-Packard Company

Part Number:  5330B
Manufacturer:  hewlett packard company
NIIN:  004832609
Item Name :  counter electronic
CAGE Code:  28480
INC Code:  26835
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 5330B (described as Counter Electronic), manufactured by Hewlett-Packard Company with CAGE code 28480. This part is registered under NSN 6625-00-483-2609, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-483-2609, NCB code 00 (origin: USA), and INC 26835. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 5330B requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 5330B

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 5330B, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-483-2609, 6625004832609

MRCCriteriaCharacteristic
BFQJPERIOD RANGE1.0 TO 100000.0
BFQXINCLOSURE MATERIAL AND LOCATIONALUMINUM CASE
BFJCACCURACY RATINGPORM 1 COUNT,PORM TIME BASE
BFQQDISPLAY UNITS INDICATORNOT INCLUDED
BFQLCOUNT RATE10000000.0 HERTZ MINIMUM SINGLE PERIOD AND 1.0 HERTZ MAXIMUM SINGLE PERIOD
BFQYINCLOSURE SURFACE TREATMENT AND LOCATIONENAMEL CASE
FAAZPHASESINGLE
SR-5MANUFACTURERS CODE1LQK8
SR-5DESIGN CONTROL REFERENCE5330B
ABKWOVERALL HEIGHT3.469 INCHES NOMINAL
AMSEVOLTAGE RATING115.0 VOLTS NOMINAL OR 230.0 VOLTS NOMINAL
ASKXELECTRICAL CONNECTION QUANTITY2
BFQNDISPLAY TYPENUMERIC READOUT TUBE
BFHZMEASUREMENT TYPEFREQUENCY AND PERIOD AVERAGE AND RATIO
ACZBFREQUENCY RATING50.0 HERTZ MINIMUM AND 400.0 HERTZ MAXIMUM
BFJBFREQUENCY RANGE0.0000 TO 10.0000 MEGAHERTZ MULTIPLE PERIOD AND 0.1000 TO 10.0000 MEGAHERTZ MULTIPLE PERIOD AND 0.0001 TO 2.0000 MEGAHERTZ MULTIPLE PERIOD AND 0.0000 TO 2.0000 MEGAHERTZ MULTIPLE PERIOD
BFJFGATE TIME100.0 SECONDS NOMINAL AND 10.0 SECONDS NOMINAL AND 1.0 SECONDS NOMINAL AND 0.01 SECONDS NOMINAL AND 0.001 SECONDS NOMINAL AND 0.0001 SECONDS NOMINAL AND 0.00001 SECONDS NOMINAL AND 0.000001 SECONDS NOMINAL
BFJGSENSITIVITY RATINGF1 SAME AS INPUT AMPLIFIER
BFQHRATIO DISPLAYF1 X MN/F2,TIME MODE F2 X N/F1 X M
BFQKPERIOD RANGE STEP QUANTITY5 DECADE STEPS
BFQMINTERNAL CALIBRATION FEATUREINCLUDED
AXGYMOUNTING METHODBENCH
BFQSDISPLAY STORAGE FACILITYINCLUDED
BFRBSTANDARD FREQUENCY OUTPUT FEATUREINCLUDED
BFQPDISPLAY DIGIT QUANTITY5
BFQRDISPLAY POSITIONED DECIMAL POINTNOT PROVIDED
BFQTREMOTE CONTROL PROVISIONSINCLUDED
BFQWSOLID STATE FEATUREINCLUDED
BFRCFREQUENCY ACCURACY/STABILITY5 PARTS/10000000/ MONTH
BFQZPLUG-IN UNITS PROVISIONNOT INCLUDED
BFRFFREQUENCY OUTPUT AMPLITUDE3.0 VOLTS PEAK TO PEAK
ALSFINTERNAL BATTERY ACCOMMODATIONNOT INCLUDED
AGBDELECTRICAL CONNECTION TYPEBNC
ABHPOVERALL LENGTH11.250 INCHES NOMINAL
SR-5THE MANUFACTURERS DATA
APTSOUTPUT FREQUENCY RATING1.0 MEGAHERTZ NOMINAL
ABMKOVERALL WIDTH16.750 INCHES NOMINAL
BFRDOUTPUT FREQUENCY WAVEFORMSINE WAVE
ACDCCURRENT TYPEAC
ABJLWATTAGE RATING IN WATTS35.0

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC N
Classification Control U
MGMT_CTL G2100n-
Quantity per pack 1
Repariability When repair is beyond lower level maintenance capability, evacuate the item to depot. disposal is not authorized below wholesale level.
Shelf Life N/A
SOS B16
Unit of Measure Ea

Freight Information

ACC: A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: Q - High sensitivity, category ii, aa&e, classified confidential
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top