Buy MAVCD-12M Relay Electromagnet part by Hi G Co Inc

Part Number:  MAVCD-12M
Alternate P/N:  MAVCD12M
Manufacturer:  hi g co inc
NIIN:  012986495
Item Name :  relay electromagnet
CAGE Code:  02289
INC Code:  32512
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for MAVCD-12M (described as Relay Electromagnet), manufactured by Hi G Co Inc with CAGE code 02289. This part is registered under NSN 5945-01-298-6495, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5945 Relays and Solenoids. Our verification process will confirm traceability through supporting identifiers including NIIN 01-298-6495, NCB code 01 (origin: USA), and INC 32512. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MAVCD-12M requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MAVCD-12M

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part MAVCD-12M, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MAVCD-12M with NSN 5945-01-298-6495, 5945012986495

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5945-01-298-6495

Item PartTypeName:

RELAY,ELECTROMAGNETIC

59450129864950N
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
8417359D

Characteristics Data of NSN 5945-01-298-6495, 5945012986495

MRCCriteriaCharacteristic
APNPDUTY TYPECONTINUOUS
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE500.0 MILLIAMPERES AC AND 1.0 AMPERES DC RESISTIVE LOAD
CWABMAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS115.0 AC AND 28.0 DC
TTQYTERMINAL TYPE AND QUANTITY8 PIN ALL FUNCTIONS
ABHPOVERALL LENGTH0.260 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
ADAVOVERALL DIAMETER0.275 INCHES MINIMUM AND 0.335 INCHES MAXIMUM
AGAVEND ITEM IDENTIFICATIONNAV-8A/B/CDCN
AKSLPURPOSE FOR WHICH DESIGNEDGENERAL
APCNCOIL QUANTITY1
APNQARC QUENCHING METHODAIR
AXHRMOUNTING FACILITY TYPE AND QUANTITY1 PLUG-IN TERMINAL SINGLE MOUNTING FACILITY
CBMECUBIC MEASURE0.025 CUBIC INCHES
CRNGNONPILE-UP MAIN CONTACT ARRANGEMENT2 POLE,DOUBLE THROW,ONE POSITION MOMENTARY
CSXFOPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP12.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE100.0 MILLIAMPERES DC LAMP LOAD
ADZCENVIRONMENTAL PROTECTIONHERMETIC
APNAWINDING DC RESISTANCE RATING235.0 OHMS NOMINAL SINGLE WINDING
CRXHTIME DELAY0.004 SECONDS MAXIMUM FIXED RELEASE TIME
CRXHTIME DELAY0.006 SECONDS MAXIMUM FIXED OPERATE TIME
AFJNFRAGILITY FACTORMODERATELY RUGGED
AKDXWINDING QUANTITY1
BBRGSTORAGE TYPEGENERAL PURPOSE WAREHOUSE
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE200.0 MILLIAMPERES DC INDUCTIVE LOAD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536490050 (NAICS 335314) Relays, electromechanical, with contacts rated at less than 10 a, for a voltage exceeding 60 v but not exceeding 1000 v
SITC : 77254 Relays for electrical apparatus used with electrical circuits not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top