Buy MM-31-80 Fixture Test Optica part by Hoffman Engineering Corporation

Part Number: MM-31-80

Alternate P/N: MM3180

Manufacturer: hoffman engineering corporation

NSN: 6650-01-210-5090

NIIN: 012105090

Item Name : fixture test optica

CAGE Code: 06097

FSC: 6650 Optical Instruments Test Equipment Components And Accessories

INC Code: 45752

Country: USA

NCB Code: 01

FSG: 66 Instruments And Laboratory Equipment

We've received your request for MM-31-80 (described as Fixture Test Optica), manufactured by Hoffman Engineering Corporation with CAGE code 06097. This part is registered under NSN 6650-01-210-5090, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6650 Optical Instruments Test Equipment Components And Accessories. Our verification process will confirm traceability through supporting identifiers including NIIN 01-210-5090, NCB code 01 (origin: USA), and INC 45752. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MM-31-80 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MM-31-80

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MM-31-80, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6650-01-210-5090, 6650012105090

MRC	Criteria	Characteristic
FEAT	SPECIAL FEATURES	USED FOR MAINTENANCE OF THE A5 CRT HARMONIZATION ASSY WUC74MCE P/N 114050-9B, PART OF MULTIPURPOSE DISPLAY WUC 74MCO;MFG NAME IS METER MOVER/X-Y TRAVERSE ASSY;HEIGHT 20.0 INCHES;WIDTH 22.0 INCHES;WEIGHT 31 LBS;MATERIAL ALUMINUM;FINISH BLACK;NO POWER REQUIREMENTS;FUNCTION-PROPERLY ALIGNS CRT AND VARIOUS INSTRUMENTS DURING TESTING;ALLOWS FOR CONSISTENT AND ACCURATE MOVEMENT ACROSS THE FACE OF THE CRT IN BOTH HORIZONTAL AND VERTICAL DIRECTIONS, CONTROL KNOBS (2) ARE USED TO POSITION THE INSTRUMENT HORIZONTALLY AND VERTICALLYAS NEEDED TO WITHIN 0.001 INCH
ABHP	OVERALL LENGTH	26.500 INCHES NOMINAL

Schedule B & Trade

End Use : 21610	Medicinal equipment
Schedule B : 9018500000 (NAICS 339115)	Other ophthalmic instruments and appliances and parts and accessories
SITC : 87225	Ophthalmic instruments and appliances, n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	L
Classification Control	U
MGMT_CTL	-------
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Flz
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	K - 92.5
LTL:	D - 200.0
NMFC:	058110 - Optical goods or instruments noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72E - Engineer and material handling equipment, test/tool sets and equipment