We've received your request for 2-141-124-05 (described as Retainer Seal), manufactured by Honeywell International Inc with CAGE code 99193. This part is registered under NSN 5330-00-150-1924, classified in FSG 53 Hardware and Abrasives / FSC 5330 Packing and Gasket Materials. Our verification process will confirm traceability through supporting identifiers including NIIN 00-150-1924, NCB code 00 (origin: USA), and INC 50336. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 2-141-124-05 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-00-150-1924 Item PartTypeName: RETAINER,SEAL | 5330 | 001501924 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2-141-124-05 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKG | BOLT CIRCLE DIAMETER | 6.430 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 1.284 INCHES MINIMUM AND 1.286 INCHES MAXIMUM |
| ABVL | APERTURE DIAMETER | 3.500 INCHES NOMINAL |
| ADAR | BODY OUTSIDE DIAMETER | 5.910 INCHES MINIMUM AND 5.920 INCHES MAXIMUM |
| AECS | BOLT HOLE QUANTITY | 22 |
| AGAV | END ITEM IDENTIFICATION | T-55ENGINE |
| APTE | MOUNTING FLANGE DIAMETER | 6.810 INCHES MINIMUM AND 6.820 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 2-141-124-05,91547 MFR REF SINGLE MATERIAL RESPONSE RETAINER |
| ZZZV | FSC APPLICATION DATA | ENGINE,GAS TURBINE,ACFT |
| End Use : 12770 | Other industrial supplies |
|---|---|
| Schedule B : 3926904500 (NAICS 339991) | Gaskets, washers & other seals |
| SITC : 89399 | Articles of plastics, n.E.S. |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input). |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | M |
|---|---|
| Classification Control | U |
| MGMT_CTL | H22blx- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | B17 |
| Unit of Measure | Ea |
| ACC: | A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | U - 50.0 |
| LTL: | U - 50.0 |
| NMFC: | 194160 - Washer or gaskets, iron or steel, |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 596 - Gaskets, (machinery and parts),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
