Buy 3575 Bracket Double Angl part by Honeywell International Inc

Part Number: 3575

Manufacturer: honeywell international inc

NSN: 5340-01-162-2565

NIIN: 011622565

Item Name : bracket double angl

CAGE Code: 99866

FSC: 5340 Hardware Commercial

INC Code: 20354

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for 3575 (described as Bracket Double Angl), manufactured by Honeywell International Inc with CAGE code 99866. This part is registered under NSN 5340-01-162-2565, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 01-162-2565, NCB code 01 (origin: USA), and INC 20354. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 3575 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 3575

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 3575, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 3575 with NSN 5340-01-162-2565, 5340011622565

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-162-2565 Item PartTypeName: BRACKET,DOUBLE ANGLE	5340	011622565	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
3575	6	2	3

Characteristics Data of NSN 5340-01-162-2565, 5340011622565

MRC	Criteria	Characteristic
ADLK	FIRST LEG LENGTH	0.800 INCHES NOMINAL
ADLL	SECOND LEG LENGTH	0.800 INCHES NOMINAL
AHLF	SECOND LEG WIDTH	0.700 INCHES NOMINAL
AHLK	FIRST LEG HOLE DIAMETER	0.281 INCHES NOMINAL
AHLN	SECOND LEG HOLE DIAMETER	0.250 INCHES NOMINAL
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.350 INCHES NOMINAL
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.300 INCHES NOMINAL
AHPW	FIRST LEG THICKNESS	0.063 INCHES NOMINAL
AHPX	SECOND LEG THICKNESS	0.063 INCHES NOMINAL
AHPZ	CENTER SECTION HEIGHT	1.600 INCHES NOMINAL
AHQA	CENTER SECTION WIDTH	0.700 INCHES NOMINAL
AHQB	CENTER SECTION THICKNESS	0.063 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	0.700 INCHES NOMINAL
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.350 INCHES NOMINAL
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.300 INCHES NOMINAL
AJZU	FIRST LEG STYLE	SQUARE
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE
AKBU	SECOND LEG STYLE	SQUARE
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
CSSR	SECOND LEG ANGLE	90.0 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	INCLUDES 1/4 IN. 28 PRESSNUT
MATT	MATERIAL	STEEL COMP 316
STYL	STYLE DESIGNATOR	DOUBLE ANGLE

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown