Buy 63C1785831 Motor Alternating C part by Howell Corp

Part Number: 63C1785831

Manufacturer: howell corp

NSN: 6105-01-230-1274

NIIN: 012301274

Item Name : motor alternating c

CAGE Code: 33743

FSC: 6105 Motors Electrical

INC Code: 00530

Country: USA

NCB Code: 01

FSG: 61 Electric Wire and Power and Distribution Equipment

We've received your request for 63C1785831 (described as Motor Alternating C), manufactured by Howell Corp with CAGE code 33743. This part is registered under NSN 6105-01-230-1274, classified in FSG 61 Electric Wire and Power and Distribution Equipment / FSC 6105 Motors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-230-1274, NCB code 01 (origin: USA), and INC 00530. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 63C1785831 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 63C1785831

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 63C1785831, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 63C1785831 with NSN 6105-01-230-1274, 6105012301274

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
6105-01-230-1274 Item PartTypeName: MOTOR,ALTERNATING CURRENT	6105	012301274	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
61051	5	9	5

Characteristics Data of NSN 6105-01-230-1274, 6105012301274

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2B SINGLE END
AAJF	THREAD DIRECTION	RIGHT-HAND SINGLE END
AAJT	OVERALL HEIGHT	11.998 INCHES
AAJU	OVERALL LENGTH	11.844 INCHES
AAJV	OVERALL WIDTH	11.998 INCHES
AASA	THREAD LENGTH	1.000 INCHES NOMINAL SINGLE END
ABRR	KEYWAY WIDTH	0.250 INCHES NOMINAL SINGLE END
ABRV	KEYWAY DEPTH	0.250 INCHES NOMINAL SINGLE END
ABWV	SHAFT DIAMETER	0.999 INCHES MINIMUM AND 1.000 INCHES MAXIMUM SINGLE END
AFYS	KEYWAY LENGTH	1.250 INCHES NOMINAL SINGLE END
AKCT	SHAFT ROTATION DIRECTION	CLOCKWISE OR COUNTERCLOCKWISE SINGLE END
AKPS	DUTY CYCLE	CONTINUOUS
ANPZ	ENCLOSURE FEATURE	TOTALLY INCLOSED
AXCP	WINDING TYPE	INDUCTION-SQUIRREL CAGE
AXGY	MOUNTING METHOD	FACE
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	4 UNTHREADED HOLE
BFMF	COOLING METHOD	AMBIENT AIR
BKPQ	INCLOSURE SPECIFICATION	NEMA
CNMM	FRAME SIZE DESIGNATION	D215YZ
CNXS	POWER RATING	3.000 HORSEPOWER OUTPUT
CQJX	NOMINAL THREAD SIZE	0.375 INCHES SINGLE END
CWCS	LENGTH OF SHAFT FROM HOUSING	4.969 INCHES SINGLE END
CWFQ	MOUNTING FACILITY CIRCLE DIAMETER	11.000 INCHES
CWFX	ROTOR SPEED RATING IN RPM	1725.0 SINGLE FULL LOAD
CWGL	CURRENT RATING IN AMPS	10.000 FIRST MULTIPLE OR 5.000 SECOND MULTIPLE INPUT
CWGQ	CONNECTION TYPE AND VOLTAGE RATING IN VOLTS	208.0 LINE TO NEUTRAL FIRST MULTIPLE OR 230.0 LINE TO NEUTRAL SECOND MULTIPLE OR 460.0 LINE TO NEUTRAL THIRD MULTIPLE INPUT
CWHZ	SHAFT END CHARACTERISTIC	A3 FIRST STYLE AND A9 SECOND STYLE AND A1 THIRD STYLE SINGLE END
FAAZ	PHASE	THREE INPUT
FEAT	SPECIAL FEATURES	SHAFT STYLE A9,HAS SECOND KEYWAY,180 DEG,SAME DIM.,SHAFT STYLE A1 IS 1.125 IN. OD
FREQ	FREQUENCY IN HERTZ	60.0 INPUT
THSD	THREAD SERIES DESIGNATOR	UNC SINGLE END
TTQY	TERMINAL TYPE AND QUANTITY	9 WIRE LEAD

Schedule B & Trade

End Use : 20000	Generators, accessories
Schedule B : 8501524000 (NAICS 335312)	Ac motors, multi-phase, exceeding 750 w but not exceeding 14.92 kw
SITC : 71631	Electric motors of an output exceeding 37.5 w (including universal ac/dc motors), ac

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)