Buy 74001C114K000 Hose Assembly Nonme part by Hydraflow Equipment Company

Part Number:  74001C114K000
Manufacturer:  hydraflow equipment company
NIIN:  013579607
Item Name :  hose assembly nonme
CAGE Code:  24984
INC Code:  20311
Country:  USA
NCB Code:  01
FSG:  47 Pipe Tubing Hose and Fittings

We've received your request for 74001C114K000 (described as Hose Assembly Nonme), manufactured by Hydraflow Equipment Company with CAGE code 24984. This part is registered under NSN 4720-01-357-9607, classified in FSG 47 Pipe Tubing Hose and Fittings / FSC 4720 Hose and Tubing Flexible. Our verification process will confirm traceability through supporting identifiers including NIIN 01-357-9607, NCB code 01 (origin: USA), and INC 20311. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 74001C114K000 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 74001C114K000

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 74001C114K000, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 74001C114K000 with NSN 4720-01-357-9607, 4720013579607

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4720-01-357-9607

Item PartTypeName:

HOSE ASSEMBLY,NONMETALLIC

47200135796070N
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
07A271C114K000225

Characteristics Data of NSN 4720-01-357-9607, 4720013579607

MRCCriteriaCharacteristic
AAGRCROSS-SECTIONAL SHAPE STYLEROUND
AAJDTHREAD CLASS3B 1ST END
ABJHTEMP RATING-65.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT SINGLE RESPONSE
ABKVOUTSIDE DIAMETER0.500 INCHES NOMINAL
ADJSEXTERIOR COLORNATURAL
AHNCCONNECTION STYLESWIVEL NUT FLARE 1ST END
AKUUEND CONNECTION DESIGNSTRAIGHT 1ST END
AWLSCONNECTION TYPETHREADED INTERNAL TUBE 1ST END
CQCSLAYER COMPOSITION AND LOCATIONOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
CQRBSEAT ANGLE37.0 DEGREES 1ST END
CRFYFLOW ANGLE90.0 DEGREES 2ND END
CRWLINSIDE SURFACE CONDITIONSMOOTH
CRXXMEASURING METHOD AND LENGTH11.500 INCHES NOMINAL OVERALL
AAJFTHREAD DIRECTIONRIGHT-HAND 1ST END
AARXINSIDE DIAMETER0.420 INCHES NOMINAL
AKUUEND CONNECTION DESIGNELBOW 2ND END
CQGMMAXIMUM OPERATING PRESSURE200.0 POUNDS PER SQUARE INCH
CRDWHYDROSTATIC TEST PRESSURE400.0 POUNDS PER SQUARE INCH
ACKHMINIMUM INSIDE BENDING RADIUS5.200 INCHES
AWLSCONNECTION TYPETHREADED INTERNAL TUBE 2ND END
CQBDBURST TEST PRESSURE800.0 POUNDS PER SQUARE INCH
CQJXNOMINAL THREAD SIZE0.750 INCHES 2ND END
THSDTHREAD SERIES DESIGNATORUNJF 1ST END
THSDTHREAD SERIES DESIGNATORUNJF 2ND END
AAJDTHREAD CLASS3B 2ND END
AAJFTHREAD DIRECTIONRIGHT-HAND 2ND END
AHNCCONNECTION STYLESWIVEL NUT FLARE 2ND END
CQJXNOMINAL THREAD SIZE0.750 INCHES 1ST END
CQRBSEAT ANGLE37.0 DEGREES 2ND END

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9sx-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 051035 - Ducts: air system
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 772 - Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top