Buy S2256 Microcircuit Digital part by Intel Corporation

Part Number:  S2256
Manufacturer:  intel corporation
NIIN:  010924621
Item Name :  microcircuit digital
CAGE Code:  34649
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for S2256 (described as Microcircuit Digital), manufactured by Intel Corporation with CAGE code 34649. This part is registered under NSN 5962-01-092-4621, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5962 Microcircuits Electronic. Our verification process will confirm traceability through supporting identifiers including NIIN 01-092-4621, NCB code 01 (origin: USA), and INC . Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your S2256 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for S2256

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part S2256, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number S2256 with NSN 5962-01-092-4621, 5962010924621

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5962-01-092-4621

Item Description:

MICROCIRCUIT,DIGITAL

5962010924621N
CIICHCCESDPMICCriticalityENAC
B
Part NumberISCRNVCRNCCHCCMSDSSADC
S2256395

Characteristics Data of NSN 5962-01-092-4621, 5962010924621

MRCCriteriaCharacteristic
CQSZINCLOSURE CONFIGURATIONDUAL-IN-LINE
AFJQSTORAGE TEMP RANGE-65.0 TO 150.0 DEG CELSIUS
CZENVOLTAGE RATING AND TYPE PER CHARACTERISTIC20.0 VOLTS MAXIMUM POWER SOURCE
CQWXOUTPUT LOGIC FORMN-TYPE METAL OXIDE-SEMICONDUCTOR LOGIC
CBBLFEATURES PROVIDEDHERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND EDGE TRIGGERED AND RESETTABLE AND W/BUFFERED OUTPUT AND W/ENABLE
TTQYTERMINAL TYPE AND QUANTITY20 PRINTED CIRCUIT
TESTTEST DATA DOCUMENT99971-7542302 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
CQSJINCLOSURE MATERIALCERAMIC AND GLASS
CSSLDESIGN FUNCTION AND QUANTITY1 CENTRAL PROCESSOR UNIT
CQZPINPUT CIRCUIT PATTERN6 INPUT
ADATBODY WIDTH0.514 INCHES MINIMUM AND 0.588 INCHES MAXIMUM
AEHXMAXIMUM POWER DISSIPATION RATING1500.0 MILLIWATTS
CRHL(NON-CORE DATA) BIT QUANTITY8
CWSGTERMINAL SURFACE TREATMENTSOLDER
ADAUBODY HEIGHT0.170 INCHES MINIMUM AND 0.215 INCHES MAXIMUM
AFGAOPERATING TEMP RANGE-55.0 TO 125.0 DEG CELSIUS
ADAQBODY LENGTH2.100 INCHES MAXIMUM

Schedule B & Trade

End Use : 21320 Semiconductors
Schedule B : 8542900000 (NAICS 334413) Electronic integrated circuits and microassembly parts
SITC : 77689 Parts of electronic integrated circuits and microassembles

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Q22rvx-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top