We've received your request for S168T1 183DHS (described as Retainer Electron T), manufactured by Interplex Nascal Inc with CAGE code 56063. This part is registered under NSN 5960-00-249-4973, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5960 Electron Tubes and Associated Hardware. Our verification process will confirm traceability through supporting identifiers including NIIN 00-249-4973, NCB code 00 (origin: USA), and INC 16182. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your S168T1 183DHS requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5960-00-249-4973 Item PartTypeName: RETAINER,ELECTRON TUBE | 5960 | 002494973 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11096 | 3 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | INSIDE DIAMETER | 1.375 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 0.750 INCHES NOMINAL |
| ABTD | MOUNTING SLOT WIDTH | 0.194 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| ABVG | MOUNTING SLOT LENGTH | 0.312 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| AGTB | DISTANCE FROM RETAINER CENTER TO CENTERLINE OF MOUNTING FACILITY | 0.906 INCHES NOMINAL |
| AGTC | DISTANCE FROM RETAINER CENTER TO END OF EXTENDED CLIP | 1.563 INCHES MAXIMUM |
| AGTD | ANGLE BETWEEN MOUNTING FACILITY AND TENSION LOOP CENTERLINES IN DEG | 60.0 |
| AGTE | ANGLE BETWEEN MOUNTING FACILITY AND LOOP HINGE CENTERLINES IN DEG | 120.0 |
| AGTM | ACCOMMODATED ITEM SECURING DEVICE TYPE | CLAMP |
| AGTR | ELECTRON TUBE BASE ACCOMMODATED DIAMETER | 1.337 TO 1.377 INCHES |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 SLOT SINGLE MOUNTING FACILITY |
| CBBL | FEATURES PROVIDED | HOLDING SPUR |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| STYL | STYLE DESIGNATOR | SINGLE FOOT,CLIP LOCKED,TENSION CLAMP |
| End Use : 21400 | Telecommunications equipment |
|---|---|
| Schedule B : 8540990000 (NAICS 334419) | Thermionic, cold cathode or photocathode tube parts, nesoi |
| SITC : 77629 | Parts of television picture tubes and other electronic valves and tubes |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | Q2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | Q - 70.0 |
| NMFC: | 095190 - Hardware, noi sub 9 |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 658 - Electrical appliances, small |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
