Buy 150F1-23DHS Retainer Electron T part by Interplex Nascal Inc

Part Number: 150F1-23DHS

Alternate P/N: 150F123DHS

Manufacturer: interplex nascal inc

NSN: 5960-00-813-6762

NIIN: 008136762

Item Name : retainer electron t

CAGE Code: 56063

FSC: 5960 Electron Tubes and Associated Hardware

INC Code: 16182

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 150F1-23DHS (described as Retainer Electron T), manufactured by Interplex Nascal Inc with CAGE code 56063. This part is registered under NSN 5960-00-813-6762, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5960 Electron Tubes and Associated Hardware. Our verification process will confirm traceability through supporting identifiers including NIIN 00-813-6762, NCB code 00 (origin: USA), and INC 16182. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 150F1-23DHS requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 150F1-23DHS

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 150F1-23DHS, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 5960-00-813-6762, 5960008136762

MRC	Criteria	Characteristic
AARX	INSIDE DIAMETER	1.337 INCHES MINIMUM AND 1.377 INCHES MAXIMUM
AEBV	UNTHREADED MOUNTING HOLE DIAMETER	0.201 INCHES NOMINAL SINGLE MOUNTING FACILITY
AGTC	DISTANCE FROM RETAINER CENTER TO END OF EXTENDED CLIP	1.437 INCHES NOMINAL
AGTD	ANGLE BETWEEN MOUNTING FACILITY AND TENSION LOOP CENTERLINES IN DEG	60.0
AGTM	ACCOMMODATED ITEM SECURING DEVICE TYPE	CLAMP
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	1 UNTHREADED HOLE SINGLE MOUNTING FACILITY
MATT	MATERIAL	STEEL
SFTT	SURFACE TREATMENT	ANY ACCEPTABLE
ABKW	OVERALL HEIGHT	0.750 INCHES NOMINAL
AGTB	DISTANCE FROM RETAINER CENTER TO CENTERLINE OF MOUNTING FACILITY	1.370 INCHES NOMINAL
AGTE	ANGLE BETWEEN MOUNTING FACILITY AND LOOP HINGE CENTERLINES IN DEG	120.0
AGTR	ELECTRON TUBE BASE ACCOMMODATED DIAMETER	+1.337/+1.377 INCHES
CBBL	FEATURES PROVIDED	HOLDING SPUR
STYL	STYLE DESIGNATOR	SINGLE FOOT, CLIP LOCKED, TENSION CLAMP

Schedule B & Trade

End Use : 21400	Telecommunications equipment
Schedule B : 8540990000 (NAICS 334419)	Thermionic, cold cathode or photocathode tube parts, nesoi
SITC : 77629	Parts of television picture tubes and other electronic valves and tubes

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown