Buy 1001266 Capacitor Fixed Ele part by Interstate Electronics Corporation

Part Number: 1001266

Manufacturer: interstate electronics corporation

NSN: 5910-01-119-4302

NIIN: 011194302

Item Name : capacitor fixed ele

CAGE Code: 07421

FSC: 5910 Capacitors

INC Code: 00008

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 1001266 (described as Capacitor Fixed Ele), manufactured by Interstate Electronics Corporation with CAGE code 07421. This part is registered under NSN 5910-01-119-4302, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5910 Capacitors. Our verification process will confirm traceability through supporting identifiers including NIIN 01-119-4302, NCB code 01 (origin: USA), and INC 00008. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 1001266 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1001266

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 1001266, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 1001266 with NSN 5910-01-119-4302, 5910011194302

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5910-01-119-4302 Item PartTypeName: CAPACITOR,FIXED,ELECTROLYTIC	5910	011194302	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
0245750002	E	2	5

Characteristics Data of NSN 5910-01-119-4302, 5910011194302

MRC	Criteria	Characteristic
AAQL	BODY STYLE	W/O MTG FACILITIES,AXIAL TERMINALS
AARF	MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR	N-4
AARG	RELIABILITY INDICATOR	ESTABLISHED
AARH	RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.0100
ABJT	TERMINAL LENGTH	2.250 INCHES NOMINAL
ABPM	BODY DIAMETER	0.312 INCHES MAXIMUM
ADAQ	BODY LENGTH	0.719 INCHES NOMINAL
AEBT	TERMINAL DIAMETER	0.025 INCHES NOMINAL
AEBZ	SCHEMATIC DIAGRAM DESIGNATOR	ELECTRODE(S) GROUNDED TO CASE,W/GND TERMINAL
AECE	ANODE TYPE	SOLID
AECN	IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS	70.0
AECQ	ELECTRICAL POLARIZATION	POLARIZED
CQBQ	CAPACITANCE VALUE PER SECTION	47.000 MICROFARADS SINGLE SECTION
CQJJ	NONDERATED OPERATING TEMP	-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
CQLH	DC LEAKAGE AT MAXIMUM OPERATING TEMP	9.0 MICROAMPERES
CQWM	NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	50.0 DC SINGLE SECTION
CRTP	TOLERANCE RANGE PER SECTION	-10.00 TO 10.00 PERCENT SINGLE SECTION
CWJK	CASE MATERIAL	METAL
CWNJ	CAPACITIVE ELECTRODE MATERIAL	TANTALUM
CWPM	DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	11.0000
CWQH	DC LEAKAGE AT REFERENCE TEMP	1.000 MICROAMPERES
CWSZ	CASE INSULATION MATERIAL	PLASTIC
TEST	TEST DATA DOCUMENT	81349-MIL-C-39006 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
TTQY	TERMINAL TYPE AND QUANTITY	2 UNINSULATED WIRE LEAD
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-C-39006/22 GOVERNMENT SPECIFICATION