Buy CA3106HR10SL4S Connector Plug Elec part by Itt Cannon Gmbh

Part Number:  CA3106HR10SL4S
Manufacturer:  itt cannon gmbh
NIIN:  008532749
Item Name :  connector plug elec
CAGE Code:  17549
INC Code:  01938
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for CA3106HR10SL4S (described as Connector Plug Elec), manufactured by Itt Cannon Gmbh with CAGE code 17549. This part is registered under NSN 5935-00-853-2749, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 00-853-2749, NCB code 00 (origin: USA), and INC 01938. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your CA3106HR10SL4S requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CA3106HR10SL4S

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part CA3106HR10SL4S, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number CA3106HR10SL4S with NSN 5935-00-853-2749, 5935008532749

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-853-2749

Item PartTypeName:

CONNECTOR,PLUG,ELECTRICAL

59350085327490PA
CIICHCCESDPMICCriticalityENAC
UAS
Part NumberISCRNVCRNCCHCCMSDSSADC
037255-0006295

Characteristics Data of NSN 5935-00-853-2749, 5935008532749

MRCCriteriaCharacteristic
CXCGINCLUDED CONTACT QUANTITY2 SINGLE MATING END SINGLE CONTACT GROUPING
AFRCCONTACT MAXIMUM CURRENT RATING IN AMPS22.0 SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTSILVER SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPEROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
AAQLBODY STYLESTRAIGHT SHAPE, INTERNAL COUPLING W/STRA IN RELIEF
CBBLFEATURES PROVIDEDPRE-TINNED TERMINAL
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS500.0 SINGLE MATING END SINGLE CONTACT GROUPING
AAJDTHREAD CLASS2B
AAJFTHREAD DIRECTIONRIGHT-HAND
ADAQBODY LENGTH1.541 INCHES MAXIMUM
ADZCENVIRONMENTAL PROTECTIONHEAT RESISTANT AND
AFQJCABLE ENTRANCE DIAMETER0.422 INCHES MAXIMUM
AFQXCONTACT POSITION ARRANGEMENT STYLE10SL-4 SINGLE MATING END
AFRPINSERT POSITION IN DEG0
CTHHSHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE OR
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES SILVER
PMWTPRECIOUS MATERIAL AND WEIGHT0.010 SILVER GRAINS, TROY
AFQRTHREADED DEVICE TYPECOUPLING FACILITY
AFQWMATING END QUANTITY1
AKMGNOMINAL THREAD LENGTH0.531 INCHES
AFRNPOLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
AFRTSHELL TYPESOLID
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CSWMSHELL SURFACE TREATMENTCADMIUM AND CHROMATE
THSDTHREAD SERIES DESIGNATORUNEF
CTKLINSERT MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-3065 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES
CMLPTHREAD QUANTITY PER INCH24
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRECONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS700.0 SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPESOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
ADAVOVERALL DIAMETER0.880 INCHES MAXIMUM
PRMTPRECIOUS MATERIALSILVER
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
AFRVCONNECTOR LOCKING METHODINTERNALLY THREADED COUPLING RING
AFRWCONNECTOR CABLE STRAIN RELIEF METHODCABLE CLAMP
AWTNOPERATING TEMP RATING1000.0 DEG FAHRENHEIT MAXIMUM
CQJXNOMINAL THREAD SIZE0.625 INCHES
ABFF(NON-CORE DATA) FURNISHED ITEMSPREFORMED PACKING
CSPTSHELL MATERIALALUMINUM ALLOY 380.0
CQZGINSERT MATERIALPLASTIC SINGLE MATING END

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536695050 (NAICS 335931) Electrical plugs & sockets, for a voltage not exceeding 1, 000 v, nesoi
SITC : 77258 Electric plugs and sockets, for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC S - Item contains silver.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top