Buy KPT02E16-23SW Connector Receptacl part by Itt Corporation

Part Number: KPT02E16-23SW

Alternate P/N: KPT02E1623SW

Manufacturer: itt corporation

NSN: 5935-01-034-2929

NIIN: 010342929

Item Name : connector receptacl

CAGE Code: 71468

FSC: 5935 Connectors Electrical

INC Code: 15093

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for KPT02E16-23SW (described as Connector Receptacl), manufactured by Itt Corporation with CAGE code 71468. This part is registered under NSN 5935-01-034-2929, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-034-2929, NCB code 01 (origin: USA), and INC 15093. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your KPT02E16-23SW requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for KPT02E16-23SW

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part KPT02E16-23SW, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number KPT02E16-23SW with NSN 5935-01-034-2929, 5935010342929

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5935-01-034-2929 Item PartTypeName: CONNECTOR,RECEPTACLE,ELECTRICAL	5935	010342929		P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				G
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1431 0359880	5	2	5

Characteristics Data of NSN 5935-01-034-2929, 5935010342929

MRC	Criteria	Characteristic
AAQL	BODY STYLE	STRAIGHT SHAPE,EXTERNAL COUPLING
ABHP	OVERALL LENGTH	1.013 INCHES MAXIMUM
ABKW	OVERALL HEIGHT	1.234 INCHES NOMINAL
ABMK	OVERALL WIDTH	1.234 INCHES NOMINAL
ADZC	ENVIRONMENTAL PROTECTION	PRESSURE PROOF AND MOISTURE PROOF AND SHOCK RESISTANT AND SOLVENT RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION PROOF AND SALT WATER RESISTANT
AEBV	UNTHREADED MOUNTING HOLE DIAMETER	0.120 INCHES NOMINAL
AEBW	CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	0.969 INCHES NOMINAL
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.969 INCHES NOMINAL
AFQK	DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.530 INCHES NOMINAL
AFQW	MATING END QUANTITY	1
AFQX	CONTACT POSITION ARRANGEMENT STYLE	16-23 SINGLE MATING END
AFQZ	CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
AFRC	CONTACT MAXIMUM CURRENT RATING IN AMPS	22.0 SINGLE MATING END 2ND CONTACT GROUPING
AFRC	CONTACT MAXIMUM CURRENT RATING IN AMPS	7.5 SINGLE MATING END 1ST CONTACT GROUPING
AFRD	CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS	1500.0 SINGLE MATING END ALL CONTACT GROUPINGS
AFRE	CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS	2100.0 SINGLE MATING END ALL CONTACT GROUPINGS
AFRN	POLARIZATION METHOD	KEYWAY OR MULTIPLE KEYWAY
AFRP	INSERT POSITION IN DEG	158.0
AFRT	SHELL TYPE	SOLID
AFRV	CONNECTOR LOCKING METHOD	BAYONET SHELL
AFRW	CONNECTOR CABLE STRAIN RELIEF METHOD	CRIMP TYPE
CQTM	TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
CQTZ	CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQYH	CONTACT SURFACE TREATMENT	GOLD AND SILVER SINGLE MATING END ALL CONTACT GROUPINGS
CQZG	INSERT MATERIAL	PLASTIC SINGLE MATING END
CSCF	TERMINAL TYPE	SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS
CSPT	SHELL MATERIAL	ALUMINUM ALLOY
CSWM	SHELL SURFACE TREATMENT	CADMIUM
CTBC	SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE
CXCG	INCLUDED CONTACT QUANTITY	1 SINGLE MATING END 2ND CONTACT GROUPING
CXCG	INCLUDED CONTACT QUANTITY	22 SINGLE MATING END 1ST CONTACT GROUPING
CXCL	INCLUDED CONTACT TYPE	ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS
PMLC	PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACE GOLD AND CONTACT SURFACE SILVER
PRMT	PRECIOUS MATERIAL	GOLD AND SILVER

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8538907080 (NAICS 335314)	Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282	Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	G - Item contains gold.

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	P - 77.5
LTL:	W - Rating variable
NMFC:	061680 - Elec wiring plugs etc
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	658 - Electrical appliances, small