Buy 77-1995-3 Switch Rotary part by Janco Corporation

Part Number: 77-1995-3

Alternate P/N: 7719953

Manufacturer: janco corporation

NSN: 5930-01-179-3417

NIIN: 011793417

Item Name : switch rotary

CAGE Code: 91812

FSC: 5930 Switches

INC Code: 02134

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 77-1995-3 (described as Switch Rotary), manufactured by Janco Corporation with CAGE code 91812. This part is registered under NSN 5930-01-179-3417, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5930 Switches. Our verification process will confirm traceability through supporting identifiers including NIIN 01-179-3417, NCB code 01 (origin: USA), and INC 02134. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 77-1995-3 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 77-1995-3

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 77-1995-3, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 77-1995-3 with NSN 5930-01-179-3417, 5930011793417

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5930-01-179-3417 Item PartTypeName: SWITCH,ROTARY	5930	011793417	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
44MY23093	5	1	C			A

Characteristics Data of NSN 5930-01-179-3417, 5930011793417

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A SINGLE MOUNTING FACILITY
AASA	THREAD LENGTH	0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABFE	HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION	EXPLOSION PROOF
ABHP	OVERALL LENGTH	3.269 INCHES NOMINAL
ABNB	FIRST FLAT LENGTH	0.421 INCHES NOMINAL SINGLE ACTUATOR
ABNC	FLAT HEIGHT	0.219 INCHES NOMINAL SINGLE ACTUATOR
ABWV	SHAFT DIAMETER	0.250 INCHES NOMINAL SINGLE ACTUATOR
ABXF	SHAFT LENGTH	0.866 INCHES NOMINAL SINGLE ACTUATOR
ADAV	OVERALL DIAMETER	1.100 INCHES MINIMUM AND 1.306 INCHES MAXIMUM
AFBH	INDIVIDUAL SECTION QUANTITY	4
AFDC	NONTURN DEVICE TYPE	SLOTTED BUSHING AT 3:00 OCLOCK
AJZE	SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
AKPX	POLE QUANTITY	1 3RD SECTION FRONT
AKPX	POLE QUANTITY	2 1ST SECTION FRONT
AKPX	POLE QUANTITY	2 2ND SECTION FRONT
AKPX	POLE QUANTITY	2 4TH SECTION FRONT
AKPY	THROW QUANTITY	5 EACH SECTION REAR
AXGY	MOUNTING METHOD	THREADED BUSHING SINGLE MOUNTING FACILITY
CQJX	NOMINAL THREAD SIZE	0.375 INCHES SINGLE MOUNTING FACILITY
CQMK	CONTACT VOLTAGE RATING IN VOLTS	115.0 AC AT SEA LEVEL
CQMK	CONTACT VOLTAGE RATING IN VOLTS	28.0 DC AT SEA LEVEL
CQTH	ROTOR THROUGH CONNECTION QUANTITY	1 3RD SECTION
CQTH	ROTOR THROUGH CONNECTION QUANTITY	2 1ST SECTION
CQTH	ROTOR THROUGH CONNECTION QUANTITY	2 2ND SECTION
CQTH	ROTOR THROUGH CONNECTION QUANTITY	2 4TH SECTION
CRJH	SWITCH ACTUATOR INDEXING POSITION QUANTITY	5 SINGLE ACTUATOR
CRSJ	SHAFT TYPE	ROUND,FLATTED SINGLE ACTUATOR
CSCF	TERMINAL TYPE	TAB,SOLDER LUG
CSHW	CONTACT SWITCHING ACTION	BREAKS BEFORE MAKES 1ST SECTION REAR
CSHW	CONTACT SWITCHING ACTION	BREAKS BEFORE MAKES 2ND SECTION REAR
CSHW	CONTACT SWITCHING ACTION	BREAKS BEFORE MAKES 4TH SECTION REAR
CSHW	CONTACT SWITCHING ACTION	MAKES BEFORE BREAKS 3RD SECTION REAR
CSLC	SWITCH ACTUATOR POSITIONING INCREMENT	30.0 DEGREES SINGLE ACTUATOR
CTDN	SWITCH ACTUATOR STOP DEVICE TYPE	FIXED STOP SINGLE ACTUATOR
CTHF	CONTACT LOAD CURRENT RATING	250.0 MILLIAMPERES RESISTIVE LOAD AND 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL
CTHF	CONTACT LOAD CURRENT RATING	75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
FEAT	SPECIAL FEATURES	DECK 3,BRIDGING ROTOR; POSITION 1 AND POSITION 5 ISOLATED,PUSH TO ENTER OR LEAVE; SPECIAL SHAFT LENGTH
STYL	STYLE DESIGNATOR	TAP,CIRCULAR,BUSHING MOUNT
THSD	THREAD SERIES DESIGNATOR	UNEF SINGLE MOUNTING FACILITY

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8536509020 (NAICS 335931)	Switches, rotary, rated at not over 5 a, for a voltage not exceeding 1, 000 v
SITC : 77255	Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	3b-----
Quantity per pack	1
Repariability	When repair is beyond lower level maintenance capability, evacuate the item to depot. disposal is not authorized below wholesale level.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	061300 - Circuit breaker/switch noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72D - Communications/electronics, other than sigint/ew or comsec repair parts and components