Buy EB30-0014 Switch Rotary part by Janco Corporation

Part Number:  EB30-0014
Alternate P/N:  EB300014
Manufacturer:  janco corporation
NIIN:  012772925
Item Name :  switch rotary
CAGE Code:  91812
INC Code:  02134
Country:  USA
NCB Code:  01

We've received your request for EB30-0014 (described as Switch Rotary), manufactured by Janco Corporation with CAGE code 91812. This part is registered under NSN 5930-01-277-2925, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-277-2925, NCB code 01 (origin: USA), and INC 02134. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your EB30-0014 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for EB30-0014

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part EB30-0014, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number EB30-0014 with NSN 5930-01-277-2925, 5930012772925

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-01-277-2925

Item PartTypeName:

SWITCH,ROTARY

59300127729250P
CIICHCCESDPMICCriticalityENAC
U G
Part NumberISCRNVCRNCCHCCMSDSSADC
0N370494-1027

Characteristics Data of NSN 5930-01-277-2925, 5930012772925

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A SINGLE MOUNTING FACILITY
AASATHREAD LENGTH0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABFEHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONDUST RESISTANT AND SAND PROOF AND WATER RESISTANT
ABHPOVERALL LENGTH1.290 INCHES NOMINAL
ABNBFIRST FLAT LENGTH0.250 INCHES NOMINAL SINGLE ACTUATOR
ABNCFLAT HEIGHT0.097 INCHES MINIMUM AND 0.103 INCHES MAXIMUM SINGLE ACTUATOR
ABWVSHAFT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM SINGLE ACTUATOR
ABXFSHAFT LENGTH0.340 INCHES NOMINAL SINGLE ACTUATOR
ADAVOVERALL DIAMETER0.600 INCHES MAXIMUM
AFBHINDIVIDUAL SECTION QUANTITY1
AFDCNONTURN DEVICE TYPEFLATTED BUSHING AT 3:00 OCLOCK
AFDCNONTURN DEVICE TYPEFLATTED BUSHING AT 9:00 OCLOCK
AFGAOPERATING TEMP RANGE-65.0 TO 125.0 DEG CELSIUS
AJZESWITCH CONTACT BASIC DESIGNCODED
AXGYMOUNTING METHODTHREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY
CQJXNOMINAL THREAD SIZE0.250 INCHES SINGLE MOUNTING FACILITY
CQMKCONTACT VOLTAGE RATING IN VOLTS5.0 DC AT SEA LEVEL
CRJHSWITCH ACTUATOR INDEXING POSITION QUANTITY6 SINGLE ACTUATOR
CRSJSHAFT TYPEROUND,FLATTED SINGLE ACTUATOR
CSCFTERMINAL TYPEPRINTED CIRCUIT
CSLCSWITCH ACTUATOR POSITIONING INCREMENT30.0 DEGREES SINGLE ACTUATOR
CSMWDETENT ROTATIONAL TORQUE RANGE8.000 TO 16.000 INCH-OUNCES SINGLE ACTUATOR
CTHFCONTACT LOAD CURRENT RATING10.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL
CTZTCONTACT ARRANGEMENT TRUTH TABLESPECIAL SINGLE SECTION
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT AND TERMINAL SURFACES GOLD
PRMTPRECIOUS MATERIALGOLD
STYLSTYLE DESIGNATORSNAP OR LINE
THSDTHREAD SERIES DESIGNATORUNEF SINGLE MOUNTING FACILITY
ZZZKSPECIFICATION/STANDARD DATA98230-0N370494 MANUFACTURERS SPECIFICATION CONTROL

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509020 (NAICS 335931) Switches, rotary, rated at not over 5 a, for a voltage not exceeding 1, 000 v
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 1-b2---
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top