We've received your request for 3416-2111-6040 (described as Lathe Engine), manufactured by Jet Equipment And Tools Inc with CAGE code 60985. This part is registered under NSN 3416-01-228-3932, classified in FSG 34 Metalworking Machinery / FSC 3416 Lathes. Our verification process will confirm traceability through supporting identifiers including NIIN 01-228-3932, NCB code 01 (origin: USA), and INC 03137. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 3416-2111-6040 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| MRC | Criteria | Characteristic |
|---|---|---|
| AGLD | Performance Type | HEAVY DUTY |
| FAAZ | Phase | THREE |
| AWHA | Bed Type | REMOVABLE BLOCK GAP |
| ACDC | Current Type | AC |
| AKSL | Purpose For Which Designed | GENERAL |
| ELEC | Voltage In Volts | 220.0 AND 440.0 |
| FREQ | Frequency In Hertz | 60 |
| BTWC | Rated Swing Through Open Gap | 23.375 INCHES NOMINAL |
| BTWM | Headstock Center Taper Size Designator | 6 MORSE |
| BTYW | Gear Change Type | QUICK |
| AAXX | Mounting Type | FLOOR |
| MRC | Decoded Requirement | Clear Text Reply |
| ADQR | Center To Center Distance | 40.000 INCHES NOMINAL |
| AKYD | Accessory Components And Quantity | 1 3-JAW CHUCK W/BACKPLATE,4-JAW CHUCK W/BACKPLATE,1 FACEPLATE,2 CENTERS,COOLANT SYSTEM;TOOL BOX,SEADY REST,FOLLOW REST,TOOL POST |
| APGF | Design Type | PLAIN |
| BTTG | Swing Over Cross Slide | 9.625 INCHES NOMINAL |
| BTWD | Actual Swing Through Open Gap | 23.375 INCHES NOMINAL |
| BTWL | Headstock Drive Type | GEARED HEAD |
| BTYN | Hollow Spindle Hole Size | 2.000 INCHES NOMINAL |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| BTSZ | Spindle Speed Quantity | 8 |
| BTTB | Spindle Speed Range In Rpm | 0.049333333 |
| BTWF | Rated Swing Over Closed Gap | 16.000 INCHES NOMINAL |
| BTWG | Actual Swing Over Closed Gap | 16.000 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| AWLX | Electric Motor Quantity | 2 |
| ASHK | Electric Motor Horsepower Rating | 7.5 |
| End Use : 21120 | Metalworking machine tools |
|---|---|
| Schedule B : 8458190030 (NAICS 333517) | Horizontal lathes, metal removing, except numerically controlled, engine or toolroom type, valued $3, 025 and over each, new |
| SITC : 73137 | Horizontal lathes, other than numerically controlled, for removing metal |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | A - Item does not contain precious metal. |
| AAC | J |
|---|---|
| Classification Control | M |
| MGMT_CTL | --y---e |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Flz |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | J - 100.0 |
| LTL: | W - Rating variable |
| NMFC: | 133300 - Machinery/machines noi |
| SHC: | Z - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72E - Engineer and material handling equipment, test/tool sets and equipment |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
