Buy 0N401054 Divider Power Radio part by Joint Electronics Type Designation System

Part Number: 0N401054

Manufacturer: joint electronics type designation system

NSN: 6625-01-269-1641

NIIN: 012691641

Item Name : divider power radio

CAGE Code: 80058

INC Code: 60411

Country: USA

NCB Code: 01

We've received your request for 0N401054 (described as Divider Power Radio), manufactured by Joint Electronics Type Designation System with CAGE code 80058. This part is registered under NSN 6625-01-269-1641, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-269-1641, NCB code 01 (origin: USA), and INC 60411. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 0N401054 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 0N401054

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 0N401054, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-269-1641, 6625012691641

MRC	Criteria	Characteristic
ABMK	OVERALL WIDTH	19.000 INCHES NOMINAL
SR-5	MANUFACTURERS CODE	98230
SR-5	THE MANUFACTURERS DATA
FEAT	SPECIAL FEATURES	RF POWER DIVIDER WITH TWO INPUTS AND 59 OUTPUTS,EITHER ONE OR TWO INPUT SIGNALS CAN BE ROUTED TO EACH OF THE OUTPUT PORTS,CONTROL OF THE CHOISE OF INPUT SIGNAL IS VIA FRONT PANEL CONTROLS OR REMOTELY VIA DIGITAL CONTROL LINES; OPERATING REQUIREMENTS: 115 PORM 10 VRMS; 48.0 TO 62.0 HERTZ; SINGLE PHASE; 22.000 IN. DEEP; RACK MOUNTED; GAIN: 16 DB MINIMUM; OUT VSWR 2.0:1 MAXIMUM; OUTPUT SIGNAL LEVEL: -9 TO 1 DBM; NOISE FIGURE: 4.3 DB MAXIMUM
ABKW	OVERALL HEIGHT	3.500 INCHES NOMINAL
AJDB	POWER RATING	25.0 WATTS AVERAGE
SR-5	DESIGN CONTROL REFERENCE	0N401054

Schedule B & Trade

End Use : 21160	Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515)	Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479	Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown