Buy SG3U Generator Signal part by Joint Electronics Type Designation System

Part Number:  SG3U
NIIN:  005192351
Item Name :  generator signal
CAGE Code:  80058
INC Code:  03901
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for SG3U (described as Generator Signal), manufactured by Joint Electronics Type Designation System with CAGE code 80058. This part is registered under NSN 6625-00-519-2351, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-519-2351, NCB code 00 (origin: USA), and INC 03901. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your SG3U requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SG3U

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part SG3U, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-519-2351, 6625005192351

MRCCriteriaCharacteristic
BDHWCALIBRATION ACCURACY RATINGPORM 1.0 PCT
FAAZPHASESINGLE
AFHSACCESSORY COMPONENT QUANTITY1 AND 1 AND 3 AND 1 AND 1
BHGCSIGNAL OUTPUT CONSTANCYPORM 2 DB
BHGDMODULATOR LOCATIONEXTERNAL
AYYEMODULATION TYPEFM
AMNEOUTPUT IMPEDANCE RATING50.0 OHMS NOMINAL
AZCGACCESSORY COMPONENT NAMEATTENUATOR,SUBASSEMBLY;ATTENUATOR,SUBASSEMBLY;ATTENUATOR,SUBASSEMBLY;TRANSFORMER,AUDIO FREQ;TRANSFORMER,POWER,STEP-UP AND STEP DOWN
SR-1DEFINITIVE GOVERNMENT SPEC/STD REFERENCESG3U
BHFYCRYSTAL CONTROLLED FEATURENOT PROVIDED
AFGQFREQUENCY RANGE RATING50.0 TO 400.0 MEGAHERTZ
ABHPOVERALL LENGTH17.312 INCHES NOMINAL
AGAVIII END ITEM IDENTIFICATIONTYPE NO. AN/URM-70
ANLCFREQUENCY BAND QUANTITY3
AMSEVOLTAGE RATING115.0 VOLTS NOMINAL
ADTVCASE MATERIALALUMINUM
BHQGMODULATION DEGREE0.5 PERCENT MINIMUM AND 0.5 PERCENT MAXIMUM
SR-1NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMILS11107
AKVYACCESSORY CONTROLLING AGENCYMEASUREMENTS CORP;MEASUREMENTS CORP;MEASUREMENTS CORP;C.G.S LABORATORIES INC;MIL SPEC
ACDCCURRENT TYPEAC
BHQDMODULATED FREQUENCY RATING160.0 HERTZ NOMINAL AND 200.0 HERTZ NOMINAL
ACZBFREQUENCY RATING50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM
AKVZACCESSORY IDENTIFYING NUMBERH4404 PART NO. AND H4405 PART NO. AND H4481 PART NO. AND 65BA5 TYPE NO. AND TF1A03NB TYPE NO.
SR-1MANUFACTURERS CODE81349
ADTYCASE SURFACE TREATMENTPAINTED
ABMKOVERALL WIDTH11.250 INCHES NOMINAL
ABKWOVERALL HEIGHT14.875 INCHES NOMINAL
SR-1SPEC/STD CONTROLLING DATA
FEATSPECIAL FEATURESINDUCTANCE-CAPACITANCE TUNED OSCILLATOR
BHFZCALIBRATED SIGNAL OUTPUT RANGE0.1 TO 100000 UV

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8543200000 (NAICS 334515) Signal generators
SITC : 77878 Electrical machines and apparatus, having individual functions, n.E.S. (other than particle accelerators)

Identification

CRITL The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input).
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC V
Classification Control Y
MGMT_CTL Gp1tdn-
Quantity per pack 1
Repariability
Shelf Life N/A
SOS B16
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: W - Rating variable
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top