We've received your request for PL7603775G1 (described as Calibrator Range In), manufactured by Joint Electronics Type Designation System with CAGE code 80058. This part is registered under NSN 6625-00-519-3818, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-519-3818, NCB code 00 (origin: USA), and INC 00767. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your PL7603775G1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| MRC | Criteria | Characteristic |
|---|---|---|
| BHXQ | INPUT PULSE POLARITY TYPE | POSITIVE |
| BHXS | OUTPUT POLARITY TYPE | POSITIVE |
| ACYN | AC VOLTAGE RATING | 6.3 VOLTS NOMINAL 1ST OPERATING POWER RQMT |
| FAAZ | PHASE | SINGLE 1ST OPERATING POWER RQMT |
| BHXW | MARKER PULSE RECURRENCE FREQUENCY RANGE | 0.0 HERTZ MINIMUM AND 36.0 HERTZ MAXIMUM |
| ACZB | FREQUENCY RATING | 60.0 HERTZ NOMINAL 1ST OPERATING POWER RQMT |
| ANSR | OUTPUT IMPEDANCE RATING | 68.0 OHMS |
| BHXT | MARKER TYPE | RANGE |
| AKWA | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM ITEM NAME | CALIBRATOR,RANGE |
| AQYB | OUTPUT VOLTAGE RATING | 25.0 VOLTS MINIMUM AND 50.0 VOLTS MAXIMUM |
| AKWB | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM ITEM TYPE NUMBER | TS-735/FPS-6 |
| BHXP | INPUT PULSE LOCATION | INTERNAL |
| ALSF | INTERNAL BATTERY ACCOMMODATION | NOT INCLUDED |
| End Use : 21160 | Measuring, testing, control instruments |
|---|---|
| Schedule B : 9030908030 (NAICS 334515) | Parts and accessories of articles of schedule b subheading 9030.39 |
| SITC : 87479 | Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | V |
|---|---|
| Classification Control | U |
| MGMT_CTL | G21sjd- |
| Quantity per pack | 1 |
| Repariability | When repair is beyond lower level maintenance capability, evacuate the item to depot. disposal is not authorized below wholesale level. |
| Shelf Life | N/A |
| SOS | B16 |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | P - 77.5 |
| LTL: | W - Rating variable |
| NMFC: | 061700 - Elec appliances/instruments noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
