Buy SM-225-GP Simulator Radar Tar part by Joint Electronics Type Designation System

Part Number:  SM-225-GP
Alternate P/N:  SM225GP
NIIN:  008387895
Item Name :  simulator radar tar
CAGE Code:  80058
INC Code:  19080
Country:  USA
NCB Code:  00

We've received your request for SM-225-GP (described as Simulator Radar Tar), manufactured by Joint Electronics Type Designation System with CAGE code 80058. This part is registered under NSN 4920-00-838-7895, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-838-7895, NCB code 00 (origin: USA), and INC 19080. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your SM-225-GP requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SM-225-GP

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part SM-225-GP, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 4920-00-838-7895, 4920008387895

MRCCriteriaCharacteristic
ZZZVIII FSC APPLICATION DATARADAR SET,NONAIRBORNE EXCEPT FIRE CONTROL AND GUIDED MISSILE
AKWBJOINT ELECTRONICS TYPE DESIGNATION SYSTEM ITEM TYPE NUMBERSM-225/GP
ABKWOVERALL HEIGHT22.500 INCHES NOMINAL
SR-5MANUFACTURERS CODE24930
SR-5DESIGN CONTROL REFERENCE88821-1
AGAVIII END ITEM IDENTIFICATIONAN/GPN-4,AN/MPN-11
ADNMFRAME MATERIALMETAL
ADAVOVERALL DIAMETER30.000 INCHES NOMINAL
AKWAJOINT ELECTRONICS TYPE DESIGNATION SYSTEM ITEM NAMESIMULATOR,RADAR TARGET
FTLDIII FUNCTIONAL DESCRIPTIONUSED TO ESTABLISH A FIXED RANGE AND ANGLE POINT ON THE DISPLAY OF ANY RADAR SET OF APPROPRIATE PRF AND FREQ; THE REFLECTED SIGNAL IS PHASE MODULATED IN RELATION TO THE RECEIVED SIGNAL; WILL APPEAR AS AN ACCEPTABLE TARGET TO THE RADAR SET WHETHER RADIATION POLARIZATION IS HORIZONTAL,VERTICAL OR CIRCULAR; WILL ALSO APPEAR AS AN ACCEPTABLE TARGET WHEN RADAR SET IS OPERATED ON NORMAL OR MTI
ALBTREFLECTING ELEMENT FREQUENCY RATING8500.0 MEGAHERTZ MINIMUM AND 9600.0 MEGAHERTZ MAXIMUM
ALCDIII USAGE DESIGNTARGET USED TO ALIGN GROUND RADAR TO DIRECT THE AIRCRAFT
FEATSPECIAL FEATURESREFLECTS A RADAR SIGNAL TO SIMULALATE A MOVING TARGET BY ELECTRONIC PHASE MODULATION,NO MOVING PARTS,TARGET IS ABLE TO REFLECT A SIGNAL,WHICH APPEARS TO THE RADAR SET AS FROM A MOVING OBJECT AND THEREBY AVOIDS SIGNAL CANCELLATION WHEN THE RADAR SET IS OPERATED ON MTI,RESPONSE PRF IS VARIABLE BY ADJUSTMENT OF BATTERY VOLTAGE,UNIT WILL MOUNT ON ANY STEEL OR ALUMINUM POLE WITH A MINIMUM WALL THICKNESS OF 1/16 IN. AND FROM 2 TO 3 1/2 IN. IN DIA.
ALBNREFLECTING ELEMENT OVERALL LENGTH30.000 INCHES NOMINAL
ALBRREFLECTING ELEMENT OVERALL DIAMETER30.000 INCHES NOMINAL
ALBSREFLECTING ELEMENT OVERALL HEIGHT5.625 INCHES NOMINAL
ALBVREFLECTING ELEMENT MATERIALALUMINUM
ALBWREFLECTING ELEMENT SURFACE TREATMENTPAINTED
ALBXFRAME SURFACE TREATMENTPAINTED
SR-5THE MANUFACTURERS DATA

Schedule B & Trade

End Use : 60010 Miscellaneous domestic exports and special transactions
Schedule B : 9023000000 (NAICS 339999) Instruments, apparatus and models, designed for demonstrational purposes, unsuitable for other uses, and parts and accessories
SITC : 87452 Instruments, apparatus or models, designed for demonstrational purposes (e.G. In education or exhibition), unsuitable for other uses

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC C
Classification Control U
MGMT_CTL 7etm---
Quantity per pack 1
Repariability If condemned or uneconomically repairable, then dispose at intermediate level.
Shelf Life N/A
SOS Nrp
Unit of Measure Ea

Freight Information

ACC: V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: W - Rating variable
LTL: Z - No rating
NMFC: 000000 - No nmfc freight description
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 723 - Radio parts and equipment, excluding tubes packed separately

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top