Buy 4MC10-200 5-P P Filter Band Pass part by K And L Microwave Inc

Part Number:  4MC10-200 5-P P
Alternate P/N:  4MC102005PP
Manufacturer:  k and l microwave inc
NIIN:  013761992
Item Name :  filter band pass
CAGE Code:  50140
INC Code:  00209
Country:  USA
NCB Code:  01

We've received your request for 4MC10-200 5-P P (described as Filter Band Pass), manufactured by K And L Microwave Inc with CAGE code 50140. This part is registered under NSN 5915-01-376-1992, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-376-1992, NCB code 01 (origin: USA), and INC 00209. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 4MC10-200 5-P P requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4MC10-200 5-P P

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 4MC10-200 5-P P, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 4MC10-200 5-P P with NSN 5915-01-376-1992, 5915013761992

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5915-01-376-1992

Item PartTypeName:

FILTER,BAND PASS

59150137619920P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
4MC10-200/5-P/P523

Characteristics Data of NSN 5915-01-376-1992, 5915013761992

MRCCriteriaCharacteristic
AGAVEND ITEM IDENTIFICATION5895-01-201-8638 SYNTHESIZER,ELECTRICAL FREQUENCY
AHCHAVERAGE POWER RATING PER FUNCTION2.0 WATTS 1ST BAND PASS 1ST FUNCTION2.0 WATTS 2ND BAND PASS 2ND FUNCTION2.0 WATTS 3RD BAND PASS 3RD FUNCTION2.055 WATTS 4TH BAND PASS 4TH FUNCTION
AKNAINCLOSURE TYPEENCASED
CBBLFEATURES PROVIDEDCHEBYSCHEV RESPONSE AND SHOCK RESISTANT
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 PIN INPUT 1ST FUNCTION1 PIN OUTPUT 2ND FUNCTION
CRBBFREQUENCY BAND WIDTH PER FUNCTION197.50 MEGAHERTZ 1ST BAND PASS AND 202.50 MEGAHERTZ 2ND BAND PASS197.50 MEGAHERTZ 2ND BAND PASS AND 202.50 MEGAHERTZ 2ND BAND PASS197.50 MEGAHERTZ 3RD BAND PASS AND 202.50 MEGAHERTZ 3RD BAND PASS197.50 MEGAHERTZ 4TH BAND PASS AND 202.50 MEG
ADAUBODY HEIGHT0.690 INCHES NOMINAL
AECRVIBRATION RESISTANCE RANGE IN HERTZ0.005
AFGAOPERATING TEMP RANGE-20.0/+85.0 DEG CELSIUS
AHAJREFERENCE FREQUENCY PER FUNCTION200.0 HERCULES NO.5599.1 PULSES PER SECOND200.0 HERCULES NO.5599.1 TWO PHASE TO TWO PHASE200.0 HERCULES NO.5599.1 TWO PHASE TO THREE PHASE200.0 HERCULES NO.5599.1 HERTZ
AHASLOAD IMPEDANCE PER FUNCTION50.0 OHMS 1ST BAND PASS50.0 OHMS 2ND BAND PASS50.0 OHMS 3RD BAND PASS50.0 OHMS 4TH BAND PASS
AHBZVOLTAGE STANDING WAVE RATIO PER FUNCTION1.5 1ST BAND PASS1.5 2ND BAND PASS1.5 3RD BAND PASS1.5 4TH BAND PASS
AKEJMOUNTING FACILITY SCREW THREAD SERIES DESIGNATORUNC
CQDRINSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS3.0 1ST BAND PASS3.0 2ND BAND PASS3.0 3RD BAND PASS3.0 4TH BAND PASS
CQJXNOMINAL THREAD SIZE0.086 INCHES
CQRGBODY MATERIALMETAL
STYLSTYLE DESIGNATORRECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
AHAQSOURCE IMPEDANCE RATING PER FUNCTION50.0 OHMS 1ST BAND PASS 1ST FUNCTION 50.0 OHMS 2ND BAND PASS 2ND FUNCTION 50.0 OHMS 3RD BAND PASS 3RD FUNCTION 50.0 OHMS 4TH BAND PASS 4TH FUNCTION
ADATBODY WIDTH0.380 INCHES NOMINAL
ABKWOVERALL HEIGHT1.030 INCHES NOMINAL
AXHRMOUNTING FACILITY TYPE AND QUANTITY2 THREADED HOLE
ADAQBODY LENGTH2.250 INCHES NOMINAL

Schedule B & Trade

End Use : 41210 Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310) Reception apparatus, nesoi
SITC : 76289 Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061990 - Electrical equip: filters
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 593 - Motors and parts, (machinery and parts),(less than 35 feet)

Complete Aerospace and NSN Parts Purchasing Platform

asach

AS9120B and ISO 9001:2015

asap_member

Aviation Suppliers Association Member

certified_company

FAA AC 0056B Accredited

as6081_supplier

AS 6081:2012 Certification

esd_association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top