Buy RDR024 Pen Inking Continuo part by Kendro Laboratory Products Lp

Part Number: RDR024

Manufacturer: kendro laboratory products lp

NSN: 7510-01-236-3953

NIIN: 012363953

Item Name : pen inking continuo

CAGE Code: 32011

INC Code: 51218

Country: USA

NCB Code: 01

We've received your request for RDR024 (described as Pen Inking Continuo), manufactured by Kendro Laboratory Products Lp with CAGE code 32011. This part is registered under NSN 7510-01-236-3953, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-236-3953, NCB code 01 (origin: USA), and INC 51218. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your RDR024 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RDR024

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part RDR024, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number RDR024 with NSN 7510-01-236-3953, 7510012363953

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
7510-01-236-3953 Item PartTypeName: PEN,INKING,CONTINUOUS FLOW RECOR	7510	012363953	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
RDR024	5	2	3

Characteristics Data of NSN 7510-01-236-3953, 7510012363953

MRC	Criteria	Characteristic
AGAV	END ITEM IDENTIFICATION	REFRIGERATOR,MECHANICAL,BLOOD BANK,4110-01-249-4476
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	PEN INKING CONTINOUS FLOW INSTR C/O SS PEN ARM/INSTR DISP 6S
FEAT	SPECIAL FEATURES	C/O PEN ARM 1; INSTRUCTIONS FOR INSTALLATION 1; DISPOSABLE,SEALED,SELF-CONTAINED INK SUPPLY; FOR USE IN FINE-LINE TEMPERATURE RECORDING; UNIT PKG QTY: 6
MATT	MATERIAL	STEEL CORROSION RESISTING

Schedule B & Trade

End Use : 40140	Other consumer nondurables
Schedule B : 9608300039 (NAICS 339940)	Fountain pens, stylograph pens and other pens, nesoi
SITC : 89521	Ball point pens; felt tipped or other porous-tipped pens and markers; fountain pens, stylograph and other pens; propelling or sliding pencils, etc.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	A - Item does not contain precious metal.