Buy 8510C-010 Analyzer Network part by Keysight Technologies Inc

Part Number:  8510C-010
Alternate P/N:  8510C010
Manufacturer:  keysight technologies inc
NIIN:  014073022
Item Name :  analyzer network
CAGE Code:  52708
INC Code:  46562
Country:  USA
NCB Code:  01
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 8510C-010 (described as Analyzer Network), manufactured by Keysight Technologies Inc with CAGE code 52708. This part is registered under NSN 6625-01-407-3022, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 01-407-3022, NCB code 01 (origin: USA), and INC 46562. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 8510C-010 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 8510C-010

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 8510C-010, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-407-3022, 6625014073022

MRCCriteriaCharacteristic
ALSFINTERNAL BATTERY ACCOMMODATIONNOT INCLUDED
AMKDINDICATOR TYPECATHODE RAY TUBE
ACYRDC VOLTAGE RATING40.0 VOLTS NOMINAL
FAAZPHASESINGLE
AGAVIII END ITEM IDENTIFICATIONF-15 DEPOT
SR-5MANUFACTURERS CODE1LQK8
SR-5THE MANUFACTURERS DATA
FEATSPECIAL FEATURESOPT 010 IS TIME DOMAIN CAPABILITY; SYSTEM CHARACTERIZES MICROWAVE NETWORK WITH A SINGLE CONNECTION OVER 45 MHZ TO 100 GHZ FREQUENCY RANGE; WIDE DYNAMIC RANGE; 60 DB EFFECTIVE DIRECTIVITY AND SOURCE MATCH; 80 DB TO 100 DB DYNAMIC RANGE; HP RECOMMENDED SYSTEM SOURCE: 8360 SYTHENSIZED SWEEP; TWO INDEPENDENT CHANNELS; BUILT-IN STORAGE & RECALL TO 8 DIFFERENT FRONT PANEL STATES; 8 SEPARATE CALIBRATIONS AND 8 SEPARATE MEASUREMENTS IN NONVOLATILE MEMORY
SR-5DESIGN CONTROL REFERENCE8510C-010
AKWCELECTRICAL POWER SOURCE RELATIONSHIPOPERATING
ACZBFREQUENCY RATING66.0 HERTZ NOMINAL
ACYNAC VOLTAGE RATING110.0 VOLTS MINIMUM AND 240.0 VOLTS MAXIMUM

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top