Buy 3060-001 Meter Arbitrary Scale part by Kierulff Electronics Inc

Part Number:  3060-001
Alternate P/N:  3060001
Manufacturer:  kierulff electronics inc
NIIN:  004567444
Item Name :  meter arbitrary scale
CAGE Code:  63285
INC Code:  16476
Country:  USA
NCB Code:  00

We've received your request for 3060-001 (described as Meter Arbitrary Scale), manufactured by Kierulff Electronics Inc with CAGE code 63285. This part is registered under NSN 6625-00-456-7444, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-456-7444, NCB code 00 (origin: USA), and INC 16476. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 3060-001 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 3060-001

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 3060-001, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-456-7444, 6625004567444

MRCCriteriaCharacteristic
MATTMaterialSTEEL
AMQYInstallation DesignPANEL
APSWMeter Body Diameter Behind Mounting Flange0.985 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
ASTWScale MarkingL SIDE OF SCALE TO 0 UA DEFLECTION COLORED RED; 20 TO 50 UA DEFLECTION COLORED GREEN; 100 UA TO R SIDE OF SCALE COLORED RED
ASSSPointer ColorBLACK SINGLE INDICATOR SINGLE RANGE
APSTMeter Depth Behind Mounting Flange0.375 INCHES MINIMUM
ADZCEnvironmental ProtectionHUMIDITY RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT AND WATERTIGHT
CTTDCircuit Attachment Method And Quantity2 SOLDER LUG
AXHRMounting Facility Type And Quantity1 THREADED BODY AND 1 THREADED RING
FEATSpecial FeaturesRUGGEDIZED
CTQLMovement Suspension MethodJEWEL PIVOT BASE
AQECMovement TypeMOVING COIL, PERMANENT MAGNET
AQFYBackground ColorWHITE SINGLE INDICATOR SINGLE RANGE
CBBLFeatures ProvidedZERO ADJUSTER
ANTGSensitivity Rating100.0 MICROAMPERES
BHDCScale Graduation TypeNONLINEAR SINGLE INDICATOR SINGLE RANGE
ZZZVFsc Application DataTEST SET,ELECT. EQUIP.
NHCFNuclear Hardness Critical FeatureNONHARDENED
APPNAccuracy In Percent-3.0 TO 3.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
STYLStyle DesignatorROUND FLUSH MTG
ABHPOverall Length1.251 INCHES MAXIMUM
APMMDial Scale Marking ColorGREEN AND RED SINGLE INDICATOR SINGLE RANGE
AACTCircuit Current For Which DesignedDC
AMKDIndicator TypeDIAL W/POINTER
ADAVOverall Diameter1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM
MRCDecoded RequirementClear Text Reply

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9tg-v
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 657 - Instruments, electric meter

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top