We've received your request for TA1718SS8X (described as Clamp Loop), manufactured by Kirkhill Ta Co with CAGE code 84971. This part is registered under NSN 5340-01-028-7173, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 01-028-7173, NCB code 01 (origin: USA), and INC 17532. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your TA1718SS8X requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-028-7173 Item PartTypeName: CLAMP,LOOP | 5340 | 010287173 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 211-501-9116 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT |
| ABMK | OVERALL WIDTH | 0.375 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.639 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.842 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE CUSHION |
| MATT | MATERIAL | STEEL COMP 302 OR STEEL COMP 321 BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5510 ASSN STD 2ND MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | PASSIVATE BAND |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Y |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9z----- |
| Quantity per pack | 10 |
| Repariability | |
| Shelf Life | N/A |
| SOS | S9i |
| Unit of Measure | Ea |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
