Buy 42003-12-02-1 Connector Plug Elec part by Knight Aerospace Products Inc

Part Number:  42003-12-02-1
Alternate P/N:  4200312021
NIIN:  013050802
Item Name :  connector plug elec
CAGE Code:  0TF60
INC Code:  01938
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 42003-12-02-1 (described as Connector Plug Elec), manufactured by Knight Aerospace Products Inc with CAGE code 0TF60. This part is registered under NSN 5935-01-305-0802, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-305-0802, NCB code 01 (origin: USA), and INC 01938. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 42003-12-02-1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 42003-12-02-1

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 42003-12-02-1, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 42003-12-02-1 with NSN 5935-01-305-0802, 5935013050802

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-305-0802

Item PartTypeName:

CONNECTOR,PLUG,ELECTRICAL

59350130508020PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
42003-12-02-1523

Characteristics Data of NSN 5935-01-305-0802, 5935013050802

MRCCriteriaCharacteristic
AAQLBODY STYLESTRAIGHT SHAPE,INTERNAL COUPLING
AFQWMATING END QUANTITY1
AFRPINSERT POSITION IN DEG0.0
CQZGINSERT MATERIALRUBBER SINGLE MATING END
CSWMSHELL SURFACE TREATMENTCADMIUM AND CHROMATE
AAJFTHREAD DIRECTIONRIGHT-HAND
ABHPOVERALL LENGTH2.312 INCHES MAXIMUM
ADAVOVERALL DIAMETER2.500 INCHES MAXIMUM
AFQRTHREADED DEVICE TYPEBACK SHELL
AFQXCONTACT POSITION ARRANGEMENT STYLE28-21 SINGLE MATING END
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
AFRCCONTACT MAXIMUM CURRENT RATING IN AMPS22.0 SINGLE MATING END ALL CONTACT GROUPINGS
AFRVCONNECTOR LOCKING METHODBAYONET LATCH
AWTNOPERATING TEMP RATING-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END 1ST CONTACT GROUPING
CQTZCONTACT MATERIALNICKEL SINGLE MATING END 2ND CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD AND NICKEL SINGLE MATING END 1ST CONTACT GROUPING
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES
CXCGINCLUDED CONTACT QUANTITY18 SINGLE MATING END 3RD CONTACT GROUPING
CXCLINCLUDED CONTACT TYPEROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
ADZCENVIRONMENTAL PROTECTIONMOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND SHOCK RESISTANT AND COLD RESISTANT AND HEAT RESISTANT AND EXPLOSION PROOF
CQJXNOMINAL THREAD SIZE1.438 INCHES
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TY 1,GR B MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290,CL 1,GR B FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END 1ST CONTACT GROUPING
AAJDTHREAD CLASS2A
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS500.0 SINGLE MATING END ALL CONTACT GROUPINGS
AFRECONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS700.0 SINGLE MATING END ALL CONTACT GROUPINGS
AFRNPOLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
AFRTSHELL TYPESOLID
CMLPTHREAD QUANTITY PER INCH18
CQTMTERMINAL LOCATIONBACK SINGLE MATING END ALL CONTACT GROUPINGS
CQTZCONTACT MATERIALNICKEL ALLOY SINGLE MATING END 3RD CONTACT GROUPING
CSCFTERMINAL TYPESOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS
CSPTSHELL MATERIALALUMINUM ALLOY
CXCGINCLUDED CONTACT QUANTITY17 SINGLE MATING END 2ND CONTACT GROUPING
CXCGINCLUDED CONTACT QUANTITY2 SINGLE MATING END 1ST CONTACT GROUPING
PMWTPRECIOUS MATERIAL AND WEIGHT0.010 GOLD GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD
THSDTHREAD SERIES DESIGNATORUNEF

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536695050 (NAICS 335931) Electrical plugs & sockets, for a voltage not exceeding 1, 000 v, nesoi
SITC : 77258 Electric plugs and sockets, for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top