Buy KW02118-DD Attenuator Variable part by Komwave Corp

Part Number:  KW02118-DD
Alternate P/N:  KW02118DD
Manufacturer:  komwave corp
NIIN:  011439857
Item Name :  attenuator variable
CAGE Code:  5Z760
INC Code:  00838
Country:  USA
NCB Code:  01

We've received your request for KW02118-DD (described as Attenuator Variable), manufactured by Komwave Corp with CAGE code 5Z760. This part is registered under NSN 5985-01-143-9857, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-143-9857, NCB code 01 (origin: USA), and INC 00838. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your KW02118-DD requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for KW02118-DD

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part KW02118-DD, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number KW02118-DD with NSN 5985-01-143-9857, 5985011439857

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5985-01-143-9857

Item PartTypeName:

ATTENUATOR,VARIABLE

59850114398570P
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
1624525

Characteristics Data of NSN 5985-01-143-9857, 5985011439857

MRCCriteriaCharacteristic
AAFSAPPLICATION DESIGNTRANSMISSION LINE
AAQLBODY STYLECOAXIAL TYPE
ABHPOVERALL LENGTH2.300 INCHES NOMINAL
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.140 INCHES NOMINAL
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH0.800 INCHES NOMINAL
ABKWOVERALL HEIGHT0.500 INCHES NOMINAL
ABMKOVERALL WIDTH1.900 INCHES NOMINAL
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.104 INCHES NOMINAL
AGAVEND ITEM IDENTIFICATIONAN/TRC-170
AHTWVOLTAGE STANDING WAVE RATIO1.50
AHUCCOAXIAL CONNECTOR SERIES DESIGNATIONSMA
ASYCINSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS1.6
ASYDOVERALL ATTENUATION RANGE IN DECIBELS0.0 TO 60.0
ASYFATTENUATION VARIATION METHODCONTINUOUS
AXHRMOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED HOLE
BNGRFREQUENCY RANGE4.400 GIGAHERTZ MINIMUM AND 5.000 GIGAHERTZ MAXIMUM
BQNROVERALL ATTENUATION ACCURACY IN DECIBELS-1.00 TO 1.00
CQTQADJUSTMENT DEVICE TYPE AND QUANTITY1 ELECTRONIC,VOLTAGE CONTROLLED
CQYJMOUNTING FACILITY PATTERNTWO POSITION DIAGONAL
CTGGIMPEDANCE RATING IN OHMS50.0 INPUT-OUTPUT
TTQYTERMINAL TYPE AND QUANTITY2 CONNECTOR,COAXIAL,FEMALE AND 3 SOLDER STUD

Schedule B & Trade

End Use : 21400 Telecommunications equipment
Schedule B : 8529109000 (NAICS 334220) Antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8525 to 8528, nesoi
SITC : 76493 Parts of television receivers, radiobroadcast receivers, transmission apparatus for radio telephony, telegraphy, broadcasting or television etc.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: J - 100.0
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top