Buy PSF-100A-6068 Switch Pressure part by L 3 Communications Corporation

Part Number:  PSF-100A-6068
Alternate P/N:  PSF100A6068
NIIN:  010252221
Item Name :  switch pressure
CAGE Code:  06141
INC Code:  00206
Country:  USA
NCB Code:  01

We've received your request for PSF-100A-6068 (described as Switch Pressure), manufactured by L 3 Communications Corporation with CAGE code 06141. This part is registered under NSN 5930-01-025-2221, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-025-2221, NCB code 01 (origin: USA), and INC 00206. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your PSF-100A-6068 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PSF-100A-6068

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part PSF-100A-6068, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number PSF-100A-6068 with NSN 5930-01-025-2221, 5930010252221

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-01-025-2221

Item PartTypeName:

SWITCH,PRESSURE

5930010252221P
CIICHCCESDPMICCriticalityENAC
U
Part NumberISCRNVCRNCCHCCMSDSSADC
581560-2523

Characteristics Data of NSN 5930-01-025-2221, 5930010252221

MRCCriteriaCharacteristic
AARXINSIDE DIAMETER0.188 INCHES NOMINAL ALL CONNECTIONS
ABHPOVERALL LENGTH2.000 INCHES NOMINAL
ABKVOUTSIDE DIAMETER0.200 INCHES NOMINAL ALL CONNECTIONS
ABKWOVERALL HEIGHT1.312 INCHES NOMINAL
ABMKOVERALL WIDTH0.475 INCHES NOMINAL
ADAQBODY LENGTH1.125 INCHES NOMINAL
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.091 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
AFDSLONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS0.719 INCHES NOMINAL
AFDVLONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS0.719 INCHES NOMINAL
AJZCPRESSURE SWITCH TYPEDIFFERENTIAL
AXGYMOUNTING METHODBASE AND UNTHREADED HOLE
CQGBCONTACT ACTION STIMULUSINCREASE
CQJBPROOF PRESSURE10.00 POUNDS PER SQUARE INCH GAGE
CQYJMOUNTING FACILITY PATTERNFOUR POSITION RECTANGULAR
CRLDNONPILE-UP CONTACT ARRANGEMENT1 POLE,SINGLE THROW,NORMALLY OPEN,MOMENTARY ACTION
CSCFTERMINAL TYPEQUICK DISCONNECT,MALE
CTHFCONTACT LOAD CURRENT RATING20.0 MILLIAMPERES RESISTIVE LOAD SINGLE VOLTAGE
CTYCCONTACT ADJUSTABILITYDEACTUATION POINT NOT ADJUSTABLE AND ACTUATION POINT NOT ADJUSTABLE
CTYXCONTACT STIMULUS RATING0.15 ACTUATION POINT NOMINAL INCHES OF WATER
CTZBCONTACT VOLTAGE RATING IN VOLTS30.0 DC AT SEA LEVEL SINGLE VOLTAGE
CTZLPRESSURE CONNECTOR TYPEBARBED,UNTHREADED EXTERNAL ALL CONNECTIONS
MEDAMEDIA FOR WHICH DESIGNEDLIQUID
STYLSTYLE DESIGNATORRECTANGULAR

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509065 (NAICS 335931) Switches, for a voltage not exceeding 1000 volts, nesoi
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL 9b-----
Quantity per pack No qup
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top