Buy MS51825-7 Sleeve Clinch Tube part by L And L Manufacturing Co Inc

Part Number: MS51825-7

Alternate P/N: MS518257

Manufacturer: l and l manufacturing co inc

NSN: 4730-00-146-0333

NIIN: 001460333

Item Name : sleeve clinch tube

CAGE Code: 93188

FSC: 4730 Hose Pipe Tube Lubrication and Railing Fittings

INC Code: 18025

Country: USA

NCB Code: 00

FSG: 47 Pipe Tubing Hose and Fittings

We've received your request for MS51825-7 (described as Sleeve Clinch Tube), manufactured by L And L Manufacturing Co Inc with CAGE code 93188. This part is registered under NSN 4730-00-146-0333, classified in FSG 47 Pipe Tubing Hose and Fittings / FSC 4730 Hose Pipe Tube Lubrication and Railing Fittings. Our verification process will confirm traceability through supporting identifiers including NIIN 00-146-0333, NCB code 00 (origin: USA), and INC 18025. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS51825-7 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS51825-7

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS51825-7, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS51825-7 with NSN 4730-00-146-0333, 4730001460333

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4730-00-146-0333 Item PartTypeName: SLEEVE,CLINCH,TUBE FITTING	4730	001460333	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
MIL-DTL-18866	2	1	4

Characteristics Data of NSN 4730-00-146-0333, 4730001460333

MRC	Criteria	Characteristic
AASG	CASEHARDENING INDICATOR	CASEHARDENED
ABHP	OVERALL LENGTH	0.442 INCHES MINIMUM AND 0.445 INCHES MAXIMUM
AETC	METALLIC HARDNESS RATING	70.0 MINIMUM ROCKWELL B AND 95.0 MAXIMUM ROCKWELL B
AGAV	END ITEM IDENTIFICATION	GENERATOR SET,30KW,60HZ,SKID MOUNTED (3ID)(MEP-007A);GENERATOR SET,DIESEL ENGINE,100KW,PU-495; HOWITZER,M-109 SERIES;VEHICLE,RECOVERY M-88;TANK,M-60 SERIES;COMBAT SYSTEM SUPPORT EQUIPMENT
AHTC	FLANGE OUTSIDE DIAMETER	0.780 INCHES MINIMUM AND 0.785 INCHES MAXIMUM
AJFY	SEAT ANGLE IN DEG	40.0
ARYW	SLEEVE OUTSIDE DIAMETER	0.710 INCHES MINIMUM AND 0.713 INCHES MAXIMUM
CPMS	HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED	0.625 INCHES NOMINAL
CRTL	CRITICALITY CODE JUSTIFICATION	FEAT
FEAT	SPECIAL FEATURES	WEAPON SYSTEM ESSENIAL
MATT	MATERIAL	STEEL
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE
STYL	STYLE DESIGNATOR	FLARELESS
ZZZT	NONDEFINITIVE SPEC/STD DATA	2 CLASS AND 6 TYPE

Identification

CRITL	The item does not have a nuclear hardened feature but does have other critical featur (s) such as tolerance, fit restrictions or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	J2200x-
Quantity per pack	25
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	052190 - Pipe, tubing, or pipe or tubing fitti
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	576 - Metal and metal products, nos, (less than 35 feet)