Buy 6042H142 Relay Electromagnet part by Labinal Llc

Part Number: 6042H142

Manufacturer: labinal llc

NSN: 5945-00-543-8127

NIIN: 005438127

Item Name : relay electromagnet

CAGE Code: 81640

FSC: 5945 Relays and Solenoids

INC Code: 32512

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 6042H142 (described as Relay Electromagnet), manufactured by Labinal Llc with CAGE code 81640. This part is registered under NSN 5945-00-543-8127, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5945 Relays and Solenoids. Our verification process will confirm traceability through supporting identifiers including NIIN 00-543-8127, NCB code 00 (origin: USA), and INC 32512. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 6042H142 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 6042H142

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 6042H142, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 6042H142 with NSN 5945-00-543-8127, 5945005438127

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5945-00-543-8127 Item PartTypeName: RELAY,ELECTROMAGNETIC	5945	005438127	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
271R95P1	3	1	C			A

Characteristics Data of NSN 5945-00-543-8127, 5945005438127

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	3.700 INCHES MAXIMUM
ABKQ	CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	3.250 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABKR	CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	2.687 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABKW	OVERALL HEIGHT	4.576 INCHES MAXIMUM
ABMK	OVERALL WIDTH	3.305 INCHES MAXIMUM
ADTV	CASE MATERIAL	METAL
ADZC	ENVIRONMENTAL PROTECTION	HERMETIC
AEBV	UNTHREADED MOUNTING HOLE DIAMETER	0.218 INCHES NOMINAL SINGLE MOUNTING FACILITY
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AKDX	WINDING QUANTITY	1
AKSL	PURPOSE FOR WHICH DESIGNED	GENERAL
APCN	COIL QUANTITY	1
APNA	WINDING DC RESISTANCE RATING	52.0 OHMS NOMINAL SINGLE WINDING
APNP	DUTY TYPE	CONTINUOUS
APNQ	ARC QUENCHING METHOD	AIR
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	4 UNTHREADED HOLE SINGLE MOUNTING FACILITY
BBRG	STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
CBME	CUBIC MEASURE	55.597 CUBIC INCHES
CQYJ	MOUNTING FACILITY PATTERN	RECTANGULAR SINGLE MOUNTING FACILITY
CRNG	NONPILE-UP MAIN CONTACT ARRANGEMENT	3 POLE,SINGLE THROW,NORMALLY OPEN,DOUBLE MAKE,MOMENTARY ACTION
CRPQ	NOMINAL OPERATING CURRENT RATING AND TYPE	600.0 MILLIAMPERES DC SINGLE WINDING
CRXH	TIME DELAY	0.01 SECONDS MAXIMUM FIXED RELEASE TIME
CRXH	TIME DELAY	0.025 SECONDS MAXIMUM FIXED OPERATE TIME
CSKP	NONPILE-UP AUXILIARY CONTACT ARRANGEMENT	1 POLE,SINGLE THROW,NORMALLY CLOSED,DOUBLE BREAK,MOMENTARY ACTION AND 1 POLE,SINGLE THROW,NORMALLY OPEN,DOUBLE MAKE,MOMENTARY ACTION
CSQC	AUXILIARY CONTACT MAXIMUM VOLTAGE RATING IN VOLTS	115.0 AC AND 28.0 DC
CSXF	OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP	28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING
CTDL	MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE	25.0 AMPERES AC AND 25.0 AMPERES DC INDUCTIVE LOAD
CTDL	MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE	25.0 AMPERES AC AND 25.0 AMPERES DC MOTOR LOAD
CTDL	MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE	25.0 AMPERES AC AND 25.0 AMPERES DC RESISTIVE LOAD
CWAB	MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS	115.0 AC AND 28.0 DC
CWGM	AUXILIARY CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE	25.0 AMPERES AC AND 25.0 AMPERES DC MOTOR LOAD
CWGM	AUXILIARY CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE	5.0 AMPERES AC AND 5.0 AMPERES DC INDUCTIVE LOAD
CWGM	AUXILIARY CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE	5.0 AMPERES AC AND 5.0 AMPERES DC RESISTIVE LOAD
CWGM	AUXILIARY CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE	750.0 MILLIAMPERES AC AND 750.0 MILLIAMPERES DC LAMP LOAD
TEST	TEST DATA DOCUMENT	81349-MIL-R-6106 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTIN
TTQY	TERMINAL TYPE AND QUANTITY	12 THREADED STUD ALL FUNCTIONS
ZZZK	SPECIFICATION/STANDARD DATA	96906-MS24143 GOVERNMENT STANDARD

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8536490075 (NAICS 335314)	Relays, electromechanical, for a voltage exceeding 60 v but not exceeding 1, 000 v, nesoi
SITC : 77254	Relays for electrical apparatus used with electrical circuits not exceeding 1, 000 volts

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	Q2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	P - 77.5
LTL:	P - 77.5
NMFC:	061300 - Circuit breaker/switch noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72D - Communications/electronics, other than sigint/ew or comsec repair parts and components