Buy 4057-392-PIECE-521 Meter Special Scale part by Lau Technologies

Part Number:  4057-392-PIECE-521
Alternate P/N:  4057392PIECE521
Manufacturer:  lau technologies
NIIN:  012989585
Item Name :  meter special scale
CAGE Code:  03860
INC Code:  61955
Country:  USA
NCB Code:  01
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 4057-392-PIECE-521 (described as Meter Special Scale), manufactured by Lau Technologies with CAGE code 03860. This part is registered under NSN 6625-01-298-9585, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 01-298-9585, NCB code 01 (origin: USA), and INC 61955. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 4057-392-PIECE-521 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4057-392-PIECE-521

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 4057-392-PIECE-521, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-298-9585, 6625012989585

MRCCriteriaCharacteristic
CTPTACCURACY RATINGPORM 1 PCT OF READING PORM 1 DIGIT SINGLE INDICATOR SINGLE RANGE
CTWNOPERATING VOLTAGE RATING IN VOLTS107.0 AC MINIMUM AND 123.0 AC MAXIMUM
APSYMETER BODY WIDTH BEHIND MOUNTING FLANGE3.770 INCHES MAXIMUM
AACTCIRCUIT CURRENT FOR WHICH DESIGNEDDC
CTTDCIRCUIT ATTACHMENT METHOD AND QUANTITY6 THREADED STUD
FEATSPECIAL FEATURESGREEN LED UNDER AND OVER VOLTAGE INDICATION
ZZZVIII FSC APPLICATION DATATEST SET,ELECT. EQUIP.
AXHRMOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED HOLE
ABHPOVERALL LENGTH5.875 INCHES NOMINAL
AMQYINSTALLATION DESIGNPANEL
ASTWSCALE MARKING0 TO 700 PSIG
AQFYBACKGROUND COLORBLACK SINGLE INDICATOR SINGLE RANGE
APSTMETER DEPTH BEHIND MOUNTING FLANGE4.875 INCHES NOMINAL
STYLSTYLE DESIGNATORRECTANGULAR FLUSH MTG
AAPBDIELECTRIC WITHSTANDING VOLTAGE IN VOLTS500.0
SUPPIII SUPPLEMENTARY FEATURESILLUMINATION CONTROLLED BY 0 TO 5 VRMS SIGNAL
ABKWOVERALL HEIGHT1.060 INCHES NOMINAL
ANRLMOUNTING ARRANGEMENT STYLETWO HOLE/STUD
ABMKOVERALL WIDTH4.812 INCHES NOMINAL
AEJNDISTANCE BETWEEN MOUNTING FACILITY CENTERS4.312 INCHES NOMINAL
CTQHDISPLAY COLORRED SINGLE INDICATOR SINGLE RANGE
CBBLFEATURES PROVIDEDOVERRANGING AND SELF-ILLUMINATION FACILITY
ACZBFREQUENCY RATING58.0 HERTZ MINIMUM AND 420.0 HERTZ MAXIMUM
BFQNDISPLAY TYPELIGHT EMITTING DIODE
ANTGSENSITIVITY RATING20.0 MILLIAMPERES
BMNGMETER BODY HEIGHT BEHIND MOUNTING FLANGE0.750 INCHES MAXIMUM
ABTBMOUNTING HOLE DIAMETER0.156 INCHES NOMINAL
ADZCENVIRONMENTAL PROTECTIONSHOCK RESISTANT AND VIBRATION RESISTANT
MARKSPECIAL MARKINGSHIGH VOLTAGE PRESENT,ON WARNING LABEL; TEST,AT TERM.
AMKDINDICATOR TYPEBARGRAPH

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 136740 - Meters elec/parts
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 657 - Instruments, electric meter

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top