Buy SMF 1888 Filter Radio Freque part by Lindgren Edmund Co

Part Number: SMF 1888

Manufacturer: lindgren edmund co

NSN: 5915-01-065-8023

NIIN: 010658023

Item Name : filter radio freque

CAGE Code: 29098

INC Code: 00765

Country: USA

NCB Code: 01

We've received your request for SMF 1888 (described as Filter Radio Freque), manufactured by Lindgren Edmund Co with CAGE code 29098. This part is registered under NSN 5915-01-065-8023, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-065-8023, NCB code 01 (origin: USA), and INC 00765. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your SMF 1888 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SMF 1888

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part SMF 1888, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number SMF 1888 with NSN 5915-01-065-8023, 5915010658023

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5915-01-065-8023 Item PartTypeName: FILTER,RADIO FREQUENCY INTERFERE	5915	010658023	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1951-1-1035-1	6	2	3

Characteristics Data of NSN 5915-01-065-8023, 5915010658023

MRC	Criteria	Characteristic
ABKW	OVERALL HEIGHT	4.032 INCHES NOMINAL
ADAQ	BODY LENGTH	3.500 INCHES MAXIMUM
ADAT	BODY WIDTH	2.000 INCHES MAXIMUM
ADAU	BODY HEIGHT	3.000 INCHES MAXIMUM
AEBY	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.500 INCHES NOMINAL
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	1.250 INCHES NOMINAL
AFGA	OPERATING TEMP RANGE	-55.0 TO 65.0 DEG CELSIUS
AHAQ	SOURCE IMPEDANCE RATING PER FUNCTION	50.0 OHMS 1ST RADIO INTERFERENCE 1ST FUNCTION
AHAQ	SOURCE IMPEDANCE RATING PER FUNCTION	50.0 OHMS 2ND RADIO INTERFERENCE 2ND FUNCTION
AHAQ	SOURCE IMPEDANCE RATING PER FUNCTION	50.0 OHMS 3RD RADIO INTERFERENCE 3RD FUNCTION
AHAQ	SOURCE IMPEDANCE RATING PER FUNCTION	50.0 OHMS 4TH RADIO INTERFERENCE 4TH FUNCTION
AHAS	LOAD IMPEDANCE PER FUNCTION	50.0 OHMS 1ST RADIO INTERFERENCE 1ST FUNCTION
AHAS	LOAD IMPEDANCE PER FUNCTION	50.0 OHMS 2ND RADIO INTERFERENCE 2ND FUNCTION
AHAS	LOAD IMPEDANCE PER FUNCTION	50.0 OHMS 3RD RADIO INTERFERENCE 3RD FUNCTION
AHAS	LOAD IMPEDANCE PER FUNCTION	50.0 OHMS 4TH RADIO INTERFERENCE 4TH FUNCTION
AHBB	POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ	400.0 1ST RADIO INTERFERENCE 1ST FUNCTION
AHBB	POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ	400.0 2ND RADIO INTERFERENCE 2ND FUNCTION
AHBB	POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ	400.0 3RD RADIO INTERFERENCE 3RD FUNCTION
AHBB	POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ	400.0 4TH RADIO INTERFERENCE 4TH FUNCTION
AHBC	OPERATING CURRENT RATING PER FUNCTION IN AMPS	5.0 1ST RADIO INTERFERENCE 1ST FUNCTION
AHBC	OPERATING CURRENT RATING PER FUNCTION IN AMPS	5.0 2ND RADIO INTERFERENCE 2ND FUNCTION
AHBC	OPERATING CURRENT RATING PER FUNCTION IN AMPS	5.0 3RD RADIO INTERFERENCE 3RD FUNCTION
AHBC	OPERATING CURRENT RATING PER FUNCTION IN AMPS	5.0 4TH RADIO INTERFERENCE 4TH FUNCTION
AHBL	PRINCIPAL CIRCUITRY TYPE PER FUNCTION	INDUCTANCE-CAPACITANCE 1ST RADIO INTERFERENCE 1ST FUNCTION
AHBL	PRINCIPAL CIRCUITRY TYPE PER FUNCTION	INDUCTANCE-CAPACITANCE 2ND RADIO INTERFERENCE 2ND FUNCTION
AHBL	PRINCIPAL CIRCUITRY TYPE PER FUNCTION	INDUCTANCE-CAPACITANCE 3RD RADIO INTERFERENCE 3RD FUNCTION
AHBL	PRINCIPAL CIRCUITRY TYPE PER FUNCTION	INDUCTANCE-CAPACITANCE 4TH RADIO INTERFERENCE 4TH FUNCTION
AKEJ	MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR	UNC
AKNA	INCLOSURE TYPE	HERMETICALLY SEALED
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	4 THREADED HOLE
CQDW	FUNCTIONAL TERMINAL TYPE AND QUANTITY	1 CONNECTOR,RECEPTACLE INPUT-GROUND 1ST FUNCTION
CQDW	FUNCTIONAL TERMINAL TYPE AND QUANTITY	1 THREADED STUD GROUND 3RD FUNCTION
CQDW	FUNCTIONAL TERMINAL TYPE AND QUANTITY	4 THREADED STUD OUTPUT 2ND FUNCTION
CQGC	OPERATING VOLTAGE RATING AND TYPE PER FUNCTION	120.0 VOLTS AC 1ST RADIO INTERFERENCE AND 400.0 VOLTS DC 1ST RADIO INTERFERENCE 1ST FUNCTION
CQGC	OPERATING VOLTAGE RATING AND TYPE PER FUNCTION	120.0 VOLTS AC 2ND RADIO INTERFERENCE AND 400.0 VOLTS DC 2ND RADIO INTERFERENCE 2ND FUNCTION
CQGC	OPERATING VOLTAGE RATING AND TYPE PER FUNCTION	120.0 VOLTS AC 3RD RADIO INTERFERENCE AND 400.0 VOLTS DC 3RD RADIO INTERFERENCE 3RD FUNCTION
CQGC	OPERATING VOLTAGE RATING AND TYPE PER FUNCTION	120.0 VOLTS AC 4TH RADIO INTERFERENCE AND 400.0 VOLTS DC 4TH RADIO INTERFERENCE 4TH FUNCTION
CQJX	NOMINAL THREAD SIZE	0.138 INCHES
CQRG	BODY MATERIAL	METAL
CRST	BODY SURFACE TREATMENT	TIN
CTJS	UNPACKAGED UNIT WEIGHT	2.000 POUNDS NOMINAL
STYL	STYLE DESIGNATOR	RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES

Schedule B & Trade

End Use : 41210	Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310)	Reception apparatus, nesoi
SITC : 76289	Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	Q2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	061990 - Electrical equip: filters
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72D - Communications/electronics, other than sigint/ew or comsec repair parts and components