Buy PS10952 Resistor Variable N part by Ling Electronics Inc

Part Number:  PS10952
Manufacturer:  ling electronics inc
NIIN:  006173826
Item Name :  resistor variable n
CAGE Code:  06510
INC Code:  37405
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for PS10952 (described as Resistor Variable N), manufactured by Ling Electronics Inc with CAGE code 06510. This part is registered under NSN 5905-00-617-3826, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-617-3826, NCB code 00 (origin: USA), and INC 37405. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your PS10952 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PS10952

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part PS10952, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 5905-00-617-3826, 5905006173826

MRCCriteriaCharacteristic
TTQYTERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
AARGRELIABILITY INDICATORNOT ESTABLISHED
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
ABXFSHAFT LENGTH0.875 INCHES NOMINAL
CQCCELECTRICAL RESISTANCE PER SECTION25.000 KILOHMS SINGLE SECTION
AEFNNONTURN DEVICE LOCATIONAT 9 OCLOCK
ADAQBODY LENGTH3.875 INCHES NOMINAL
AAPNSECTION QUANTITY1
AEDXSHAFT STYLEROUND
AJYQSCREW THREAD QUANTITY PER INCH32.0
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AJYNSCREW THREAD DIAMETER0.250 INCHES NOMINAL
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER55.0 SINGLE SECTION
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-25.0 TO 25.0 SINGLE SECTION
ADAPMOUNTING BUSHING LENGTH0.250 INCHES NOMINAL
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG9000.0 NOMINAL
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION9000.0 NOMINAL
AXGYMOUNTING METHODSTANDARD BUSHING
ABWVSHAFT DIAMETER0.250 INCHES NOMINAL
AEFDACTUATOR TYPESINGLE SHAFT
AEFPNONTURN DEVICE RADIUS0.438 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS3.0 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0/+5.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH
CSDLSTANDARD TAPER CURVE PER SECTIONA SINGLE SECTION
ABPMBODY DIAMETER2.984 INCHES NOMINAL

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top