Buy 9115C1034-2 Connector Plug Elec part by Lockheed Corp

Part Number:  9115C1034-2
Alternate P/N:  9115C10342
Manufacturer:  lockheed corp
NIIN:  008432425
Item Name :  connector plug elec
CAGE Code:  87557
INC Code:  01938
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 9115C1034-2 (described as Connector Plug Elec), manufactured by Lockheed Corp with CAGE code 87557. This part is registered under NSN 5935-00-843-2425, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 00-843-2425, NCB code 00 (origin: USA), and INC 01938. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 9115C1034-2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 9115C1034-2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 9115C1034-2, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 9115C1034-2 with NSN 5935-00-843-2425, 5935008432425

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-843-2425

Item PartTypeName:

CONNECTOR,PLUG,ELECTRICAL

59350084324250PA
CIICHCCESDPMICCriticalityENAC
UAS
Part NumberISCRNVCRNCCHCCMSDSSADC
10687315-2525

Characteristics Data of NSN 5935-00-843-2425, 5935008432425

MRCCriteriaCharacteristic
AAQLBODY STYLESTRAIGHT SHAPE,INTERNAL COUPLING
ADZCENVIRONMENTAL PROTECTIONPRESSURE PROOF AND WEATHERPROOF
AFQJCABLE ENTRANCE DIAMETER0.212 INCHES NOMINAL
AFQWMATING END QUANTITY1
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS500.0 SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTSILVER SINGLE MATING END SINGLE CONTACT GROUPING
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-S-365 WITH A CLEAR PHOSPHATE FINISH FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSCFTERMINAL TYPESOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
CSGFCONTACT MATERIAL DOCUMENT AND CLASSIFICATIONQQ-P-330 OR QQ-C-530 OR QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSPTSHELL MATERIALCOPPER ALLOY
CSWMSHELL SURFACE TREATMENTSILVER
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-S-365 WITH A CLEAR PHOSPHATE FINISH FED SPEC SINGLE TREATMENT RESPONSE
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT AND SHELL SURFACE SILVER
PMWTPRECIOUS MATERIAL AND WEIGHT0.005 SILVER GRAINS,TROY
AAJFTHREAD DIRECTIONRIGHT-HAND
ABHPOVERALL LENGTH1.047 INCHES NOMINAL
ADAVOVERALL DIAMETER0.562 INCHES NOMINAL
AFQXCONTACT POSITION ARRANGEMENT STYLEBNC SINGLE MATING END
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRTSHELL TYPESOLID
AFRVCONNECTOR LOCKING METHODBAYONET LATCH
AFRWCONNECTOR CABLE STRAIN RELIEF METHODCONDUIT NUT
AFRYRADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC TETRAFLUOROETHYLENE SINGLE MATING END
CTHHSHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE
CXCGINCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPECOAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
PRMTPRECIOUS MATERIALSILVER

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536695050 (NAICS 335931) Electrical plugs & sockets, for a voltage not exceeding 1, 000 v, nesoi
SITC : 77258 Electric plugs and sockets, for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC S - Item contains silver.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top