Buy 30AA13 Relay Electromagnet part by Lockheed Electronics Co Inc

Part Number:  30AA13
Manufacturer:  lockheed electronics co inc
NIIN:  006609315
Item Name :  relay electromagnet
CAGE Code:  19723
INC Code:  32512
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 30AA13 (described as Relay Electromagnet), manufactured by Lockheed Electronics Co Inc with CAGE code 19723. This part is registered under NSN 5945-00-660-9315, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5945 Relays and Solenoids. Our verification process will confirm traceability through supporting identifiers including NIIN 00-660-9315, NCB code 00 (origin: USA), and INC 32512. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 30AA13 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 30AA13

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 30AA13, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 30AA13 with NSN 5945-00-660-9315, 5945006609315

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5945-00-660-9315

Item PartTypeName:

RELAY,ELECTROMAGNETIC

59450066093150N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
154-0183-8831CA

Characteristics Data of NSN 5945-00-660-9315, 5945006609315

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH4.500 INCHES MAXIMUM
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH3.000 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABKWOVERALL HEIGHT3.710 INCHES NOMINAL
ABMKOVERALL WIDTH2.000 INCHES MAXIMUM
ADTVCASE MATERIALMETAL
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.266 INCHES NOMINAL SINGLE MOUNTING FACILITY
AFJNFRAGILITY FACTORMODERATELY RUGGED
AGAVEND ITEM IDENTIFICATIONMRAP RG 31; MEDIUM MINE PROTECTED VEHICLE-MMPV
AKDXWINDING QUANTITY1
AKSLPURPOSE FOR WHICH DESIGNEDGENERAL
APCNCOIL QUANTITY1
APNAWINDING DC RESISTANCE RATING59.0 OHMS MINIMUM SINGLE WINDING
APNPDUTY TYPECONTINUOUS
APNQARC QUENCHING METHODAIR
AXHRMOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED HOLE SINGLE MOUNTING FACILITY
BBRGSTORAGE TYPEGENERAL PURPOSE WAREHOUSE
CBMECUBIC MEASURE33.390 CUBIC INCHES
CQYJMOUNTING FACILITY PATTERNIN-LINE SINGLE MOUNTING FACILITY
CRNGNONPILE-UP MAIN CONTACT ARRANGEMENT1 POLE,SINGLE THROW,NORMALLY OPEN,DOUBLE MAKE,MOMENTARY ACTION
CRXHTIME DELAY0.01 SECONDS MAXIMUM FIXED RELEASE TIME
CRXHTIME DELAY0.025 SECONDS MAXIMUM FIXED OPERATE TIME
CSXFOPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE100.0 AMPERES DC INDUCTIVE LOAD
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE200.0 AMPERES DC MOTOR LOAD
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE200.0 AMPERES DC RESISTIVE LOAD
CWABMAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS28.0 DC
TESTTEST DATA DOCUMENT81349-MIL-R-6106 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTIN
TTQYTERMINAL TYPE AND QUANTITY4 THREADED STUD ALL FUNCTIONS
ZZZKSPECIFICATION/STANDARD DATA96906-MS24171 GOVERNMENT STANDARD

Schedule B & Trade

End Use : 50030 Military trucks, armored vehicles, etc.
Schedule B : 8710000090 (NAICS 336992) Parts of armored fighting vehicles, motorized, whether or not fitted with weapons
SITC : 89111 Tanks and other armored fighting vehicles, motorized, whether or not fitted with weapons, and parts of such vehicles

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Q2100x-
Quantity per pack 1
Repariability If condemned or uneconomically repairable , then dispose at direct support (ds) level.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top