Buy 47-669-054-1 Nut Plain Hexagon part by Lockheed Martin Corporation

Part Number: 47-669-054-1

Alternate P/N: 476690541

Manufacturer: lockheed martin corporation

NSN: 5310-00-478-6021

NIIN: 004786021

Item Name : nut plain hexagon

CAGE Code: 80070

FSC: 5310 Nuts and Washers

INC Code: 01857

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 47-669-054-1 (described as Nut Plain Hexagon), manufactured by Lockheed Martin Corporation with CAGE code 80070. This part is registered under NSN 5310-00-478-6021, classified in FSG 53 Hardware and Abrasives / FSC 5310 Nuts and Washers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-478-6021, NCB code 00 (origin: USA), and INC 01857. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 47-669-054-1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 47-669-054-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 47-669-054-1, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 47-669-054-1 with NSN 5310-00-478-6021, 5310004786021

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-00-478-6021 Item PartTypeName: NUT,PLAIN,HEXAGON	5310	004786021		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
47-669-054-1	2	2	3

Characteristics Data of NSN 5310-00-478-6021, 5310004786021

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	RIGHT-HAND
ACTA	NUT STYLE	HEXAGON
ADEA	NUT HEIGHT	0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
AGGP	DRILLED HOLE DIAMETER	0.062 INCHES NOMINAL
ALET	HOLE TYPE AND QUANTITY	2 DRILLED
ASDB	WIDTH ACROSS FLATS	1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM
BZRR	THREAD SERIES	UNF
CMLP	THREAD QUANTITY PER INCH	16
CQJX	NOMINAL THREAD SIZE	0.750 INCHES
CRHC	HOLE CONFIGURATION STYLE	CONFIGURATION B
CRSQ	COUNTERSINK ANGLE	109.5 DEGREES MINIMUM AND 110.5 DEGREES MAXIMUM NUT
CRTM	BEARING SURFACE TYPE	CHAMFERED OR WASHER FACED
MATT	MATERIAL	STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OR STEEL COMP 1084 OR STEEL COMP 1090 OR STEEL COMP 8740 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD 1ST MATERIAL RESPONSE OR 66 FED STD 2ND MATERIAL RESPONSE OR 66 FED STD 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 6TH MATERIAL RESPONSE OVERALL

Schedule B & Trade

End Use : 12300	Finished metal shapes
Schedule B : 7318160000 (NAICS 332722)	Nuts of iron or steel
SITC : 69421	Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, threaded, of iron or steel

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	U - 50.0
LTL:	W - Rating variable
NMFC:	093486 - Bolts, nuts or screws, noi (sub 3)
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	573 - Bolts or nuts (iron or steel),(less than 35 feet)