Buy 8503775-2 Resistor Thermal part by Lockheed Martin Corporation

Part Number:  8503775-2
Alternate P/N:  85037752
Manufacturer:  lockheed martin corporation
NIIN:  008042768
Item Name :  resistor thermal
CAGE Code:  02734
INC Code:  00309
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 8503775-2 (described as Resistor Thermal), manufactured by Lockheed Martin Corporation with CAGE code 02734. This part is registered under NSN 5905-00-804-2768, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-804-2768, NCB code 00 (origin: USA), and INC 00309. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 8503775-2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 8503775-2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 8503775-2, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 8503775-2 with NSN 5905-00-804-2768, 5905008042768

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-804-2768

Item PartTypeName:

RESISTOR,THERMAL

5905008042768NB
CIICHCCESDPMICCriticalityENAC
BU
Part NumberISCRNVCRNCCHCCMSDSSADC
31TD261CA

Characteristics Data of NSN 5905-00-804-2768, 5905008042768

MRCCriteriaCharacteristic
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-12.0 TO 12.0 4TH RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-14.2 TO 14.2 3RD RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-16.0 TO 16.0 1ST RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-17.5 TO 17.5 9TH RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-18.9 TO 18.9 10TH RESISTANCE-TEMPERATURE POINT
AKNAINCLOSURE TYPEENCAPSULATED
CBMECUBIC MEASURE0.003 CUBIC INCHES
CRQJZERO POWER RESISTANCE TOLERANCE IN PERCENT AT REFERENCE TEMP-10.0 TO 10.0
CTGTREFERENCE TEMP IN DEG CELSIUS25.0
SFTTSURFACE TREATMENTSOLDER TERMINAL
STYLSTYLE DESIGNATORSQUARE OR RECTANGULAR WAFER
TTQYTERMINAL TYPE AND QUANTITY2 WIRE LEAD
ADAUBODY HEIGHT0.160 INCHES MAXIMUM
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH1.250 INCHES MINIMUM
ADAQBODY LENGTH0.100 INCHES MAXIMUM
ADATBODY WIDTH0.160 INCHES MAXIMUM
AEBTTERMINAL DIAMETER0.013 INCHES NOMINAL
AEHYAMBIENT TEMP AT FULL RATED POWER25.0 DEG CELSIUS
AEHZMAXIMUM OPERATING TEMP105.0 DEG CELSIUS
AEJATHERMAL TIME CONSTANT IN SECONDS5.0
AEJBPOWER DISSIPATION CONSTANT IN MILLIWATTS PER DEG CELSIUS2.6
AEJCZERO POWER TEMP COEFFICIENT OF RESISTANCE IN PERCENT PER DEG CELSIUS-4.40
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER-30.0 DEG CELSIUS 3RD RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER-40.0 DEG CELSIUS 2ND RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER-55.0 DEG CELSIUS 1ST RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER0.0 DEG CELSIUS 4TH RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER10.0 DEG CELSIUS 5TH RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER100.0 DEG CELSIUS 8TH RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER125.0 DEG CELSIUS 9TH RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER150.0 DEG CELSIUS 10TH RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER30.0 DEG CELSIUS 6TH RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER70.0 DEG CELSIUS 7TH RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP1.25 KILOHMS 5TH RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP100.0 KILOHMS 1ST RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP17.92 KILOHMS 3RD RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP174.7 OHMS 7TH RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP18.43 OHMS 10TH RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP3.274 KILOHMS 4TH RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP33.89 OHMS 9TH RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP34.28 KILOHMS 2ND RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP67.54 OHMS 8TH RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP805.3 OHMS 6TH RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-10.4 TO 10.4 5TH RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-10.4 TO 10.4 6TH RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-13.5 TO 13.5 7TH RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-14.8 TO 14.8 2ND RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-15.9 TO 15.9 8TH RESISTANCE-TEMPERATURE POINT
CQWDZERO POWER RESISTANCE1.000 KILOHMS

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top