Buy 10001955 Adapter Connector part by Lockheed Martin Corporation

Part Number:  10001955
Manufacturer:  lockheed martin corporation
NIIN:  007906368
Item Name :  adapter connector
CAGE Code:  56232
INC Code:  15091
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 10001955 (described as Adapter Connector), manufactured by Lockheed Martin Corporation with CAGE code 56232. This part is registered under NSN 5935-00-790-6368, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 00-790-6368, NCB code 00 (origin: USA), and INC 15091. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 10001955 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 10001955

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 10001955, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 10001955 with NSN 5935-00-790-6368, 5935007906368

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-790-6368

Item PartTypeName:

ADAPTER,CONNECTOR

5935007906368P
CIICHCCESDPMICCriticalityENAC
G
Part NumberISCRNVCRNCCHCCMSDSSADC
10001955125

Characteristics Data of NSN 5935-00-790-6368, 5935007906368

MRCCriteriaCharacteristic
AAQLBODY STYLESTRAIGHT SHAPE W/FLANGE
ABHPOVERALL LENGTH1.050 INCHES NOMINAL
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.120 INCHES NOMINAL
AEBWCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.969 INCHES NOMINAL
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.969 INCHES NOMINAL
AFQWMATING END QUANTITY2
AFQZCONTACT REMOVABILITYNONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
AFRNPOLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
AFRPINSERT POSITION IN DEG0.0
AFRTSHELL TYPESOLID
CQTZCONTACT MATERIALCOPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CSPTSHELL MATERIALALUMINUM ALLOY
CSWMSHELL SURFACE TREATMENTCADMIUM AND CHROMATE
CXCLINCLUDED CONTACT TYPEROUND PIN 1ST MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPEROUND SOCKET 2ND MATING END SINGLE CONTACT GROUPING
PRMTPRECIOUS MATERIALGOLD
ABKWOVERALL HEIGHT1.219 INCHES NOMINAL
ABMKOVERALL WIDTH1.219 INCHES NOMINAL
ADZCENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND VIBRATION RESISTANT AND MOISTURE RESISTANT
AFQKDISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.562 INCHES NOMINAL
AFQXCONTACT POSITION ARRANGEMENT STYLE16-8 ALL MATING ENDS
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS600.0 ALL MATING ENDS SINGLE CONTACT GROUPING
AFRVCONNECTOR LOCKING METHODBAYONET PIN
CQYHCONTACT SURFACE TREATMENTGOLD ALL MATING ENDS SINGLE CONTACT GROUPING
CQZGINSERT MATERIALRUBBER ALL MATING ENDS
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES
CXCGINCLUDED CONTACT QUANTITY8 1ST MATING END SINGLE CONTACT GROUPING
CXCGINCLUDED CONTACT QUANTITY8 2ND MATING END SINGLE CONTACT GROUPING
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0.016 GOLD GRAINS,TROY

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8548900100 (NAICS 335999) Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85
SITC : 77813 Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, etc; electric parts of mach or apps, nes

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability
Shelf Life N/A
SOS S9e
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 5 - Low sensitivity, category iv, aa&e, unclassified
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top