Buy 7559276P5 Connector Receptacl part by Lockheed Martin Corporation

Part Number: 7559276P5

Manufacturer: lockheed martin corporation

NSN: 5935-01-298-0431

NIIN: 012980431

Item Name : connector receptacl

CAGE Code: 99971

FSC: 5935 Connectors Electrical

INC Code: 15093

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 7559276P5 (described as Connector Receptacl), manufactured by Lockheed Martin Corporation with CAGE code 99971. This part is registered under NSN 5935-01-298-0431, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-298-0431, NCB code 01 (origin: USA), and INC 15093. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 7559276P5 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 7559276P5

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 7559276P5, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 7559276P5 with NSN 5935-01-298-0431, 5935012980431

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5935-01-298-0431 Item PartTypeName: CONNECTOR,RECEPTACLE,ELECTRICAL	5935	012980431	0	P	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	G
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
50-646-1139-89	5	2	5

Characteristics Data of NSN 5935-01-298-0431, 5935012980431

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	0.489 INCHES MINIMUM
AEBV	UNTHREADED MOUNTING HOLE DIAMETER	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM
AFQX	CONTACT POSITION ARRANGEMENT STYLE	SMA SINGLE MATING END
AFRF	CONTACT MAXIMUM FREQUENCY RATING	18000.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING
AFRT	SHELL TYPE	SOLID
AGAV	END ITEM IDENTIFICATION	RADAR SET AN/APQ-169ATKR
CMLP	THREAD QUANTITY PER INCH	36
CSCF	TERMINAL TYPE	CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
CTBC	SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35,TY 1 FED SPEC SINGLE TREATMENT RESPONSE
CTKL	INSERT MATERIAL DOCUMENT AND CLASSIFICATION	MIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
PMLC	PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACE GOLD
AAJF	THREAD DIRECTION	RIGHT-HAND
ABKW	OVERALL HEIGHT	0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM
AFQR	THREADED DEVICE TYPE	COUPLING FACILITY
CQZG	INSERT MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END
CRBJ	CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-G-45204 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CSPT	SHELL MATERIAL	STEEL CORROSION RESISTING
CSWM	SHELL SURFACE TREATMENT	PASSIVATE
PMWT	PRECIOUS MATERIAL AND WEIGHT	0.005 GOLD GRAINS,TROY
THSD	THREAD SERIES DESIGNATOR	UNS
AAJD	THREAD CLASS	2A
ADZC	ENVIRONMENTAL PROTECTION	VIBRATION RESISTANT AND SHOCK RESISTANT AND COLD RESISTANT AND HEAT RESISTANT AND CORROSION RESISTANT AND MOISTURE RESISTANT
AFQW	MATING END QUANTITY	1
AFQZ	CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRY	RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS	50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CQJX	NOMINAL THREAD SIZE	0.250 INCHES
CQTM	TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
CQTZ	CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CXCG	INCLUDED CONTACT QUANTITY	1 SINGLE MATING END SINGLE CONTACT GROUPING
AFRD	CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS	250.0 SINGLE MATING END SINGLE CONTACT GROUPING
AFRV	CONNECTOR LOCKING METHOD	INTERNALLY THREADED COUPLING NUT
CQYH	CONTACT SURFACE TREATMENT	GOLD AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING
CSGF	CONTACT MATERIAL DOCUMENT AND CLASSIFICATION	QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CXCL	INCLUDED CONTACT TYPE	COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
PRMT	PRECIOUS MATERIAL	GOLD

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8538907080 (NAICS 335314)	Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282	Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	G - Item contains gold.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	Sf9eh-n
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	061680 - Elec wiring plugs etc
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	658 - Electrical appliances, small