Buy 7591041P6 Dummy Connector Rec part by Lockheed Martin Corporation

Part Number:  7591041P6
Manufacturer:  lockheed martin corporation
NIIN:  013484239
Item Name :  dummy connector rec
CAGE Code:  99971
INC Code:  15092
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 7591041P6 (described as Dummy Connector Rec), manufactured by Lockheed Martin Corporation with CAGE code 99971. This part is registered under NSN 5935-01-348-4239, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-348-4239, NCB code 01 (origin: USA), and INC 15092. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 7591041P6 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 7591041P6

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 7591041P6, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 7591041P6 with NSN 5935-01-348-4239, 5935013484239

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-348-4239

Item PartTypeName:

DUMMY CONNECTOR,RECEPTACLE

59350134842390PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
0005546595

Characteristics Data of NSN 5935-01-348-4239, 5935013484239

MRCCriteriaCharacteristic
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
ABKWOVERALL HEIGHT0.345 INCHES NOMINAL
ADZCENVIRONMENTAL PROTECTIONSHOCK RESISTANT AND VIBRATION RESISTANT
AFQWMATING END QUANTITY1
AWTNOPERATING TEMP RATING-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
CQYHCONTACT SURFACE TREATMENTGOLD AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING
CXCGINCLUDED CONTACT QUANTITY70 SINGLE MATING END SINGLE CONTACT GROUPING
PRMTPRECIOUS MATERIALGOLD
AAQLBODY STYLESTRAIGHT TYPE
ABHPOVERALL LENGTH3.690 INCHES MINIMUM AND 3.720 INCHES MAXIMUM
AEJNDISTANCE BETWEEN MOUNTING FACILITY CENTERS3.577 INCHES MINIMUM AND 3.583 INCHES MAXIMUM
AFQXCONTACT POSITION ARRANGEMENT STYLE4 ROWS OF CONTACTS NON-INSERTED BOARD SINGLE MATING END
AFRCCONTACT MAXIMUM CURRENT RATING IN AMPS1.0 SINGLE MATING END SINGLE CONTACT GROUPING
CRBJCONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TY 2,CL 1,GRADE C MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPESPRING PINCERS SINGLE MATING END SINGLE CONTACT GROUPING
FEATSPECIAL FEATURESTHE FOLLOWING CONTACTS ARE SHORTED; 1,3,5,8,10,12,15,17,19,22,24,26,29,31,33,36,38,40,43,45,47,50,52,54,57,59,61,64,66,68
ABMKOVERALL WIDTH0.406 INCHES MAXIMUM
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.053 INCHES MINIMUM AND 0.057 INCHES MAXIMUM
AFRVCONNECTOR LOCKING METHODFRICTION
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC AND GLASS FIBER SINGLE MATING END
CSGFCONTACT MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0.070 GOLD GRAINS,TROY

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8548900100 (NAICS 335999) Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85
SITC : 77813 Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, etc; electric parts of mach or apps, nes

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: T - 55.0
NMFC: 062020 - Fittings elec outlet box i/s
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top