Buy 338941-2 Microcircuit Digita part by Lockheed Martin Corporation

Part Number:  338941-2
Alternate P/N:  3389412
Manufacturer:  lockheed martin corporation
NIIN:  003516520
Item Name :  microcircuit digita
CAGE Code:  56232
INC Code:  31779
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 338941-2 (described as Microcircuit Digita), manufactured by Lockheed Martin Corporation with CAGE code 56232. This part is registered under NSN 5962-00-351-6520, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5962 Microcircuits Electronic. Our verification process will confirm traceability through supporting identifiers including NIIN 00-351-6520, NCB code 00 (origin: USA), and INC 31779. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 338941-2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 338941-2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 338941-2, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 338941-2 with NSN 5962-00-351-6520, 5962003516520

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5962-00-351-6520

Item PartTypeName:

MICROCIRCUIT,DIGITAL

5962003516520NA
CIICHCCESDPMICCriticalityENAC
AA
Part NumberISCRNVCRNCCHCCMSDSSADC
338941-2B25

Characteristics Data of NSN 5962-00-351-6520, 5962003516520

MRCCriteriaCharacteristic
ADAQBODY LENGTH0.660 INCHES MINIMUM AND 0.785 INCHES MAXIMUM
ADATBODY WIDTH0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
ADAUBODY HEIGHT0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
AEHXMAXIMUM POWER DISSIPATION RATING250.0 MILLIWATTS
AFGAOPERATING TEMP RANGE-55.0 TO 125.0 DEG CELSIUS
AFJQSTORAGE TEMP RANGE-65.0 TO 150.0 DEG CELSIUS
CBBLFEATURES PROVIDEDHERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND MEDIUM POWER AND MEDIUM SPEED
CQSJINCLOSURE MATERIALCERAMIC AND GLASS
CQSZINCLOSURE CONFIGURATIONDUAL-IN-LINE
CQWXOUTPUT LOGIC FORMDIODE-TRANSISTOR LOGIC
CQZPINPUT CIRCUIT PATTERNQUAD 2 INPUT
CSSLDESIGN FUNCTION AND QUANTITY4 GATE,NAND-NOR
CTFTCASE OUTLINE SOURCE AND DESIGNATORT0-116 JOINT ELECTRON DEVICE ENGINEERING COUNCIL
CZEQTIME RATING PER CHACTERISTIC80.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME,LOW TO HIGH LEVEL OUTPUT AND 30.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME,HIGH TO LOW LEVEL OUTPUT
TESTTEST DATA DOCUMENT25055-347-0008-900 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING

Schedule B & Trade

End Use : 50070 Parts for military-type goods
Schedule B : 8803300060 (NAICS 336413) Other parts of airplanes or helicopters for use in military aircraft (excludes propellers, rotors, undercarriages, and parts thereof)
SITC : 79295 Parts of airplanes or helicopters, n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9lg-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: S - 60.0
LTL: S - 60.0
NMFC: 013140 - Aluminum angles
SHC: Z - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 576 - Metal and metal products, nos, (less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top